- Runways, Taxiways - Ground Support >
- Airfield equipment >
- Airport light
Airport lights
... Red Low Intensity ICAO type A, CAA group A, photocell & flasher Red MOD lighting Guidance Red MOD lighting Guidance, photocell & flasher Red MOD lighting Guidance Red MOD lighting ...
CEL Aviation
... The inset light is used in place of an elevated heliport perimeter light at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles. These lights ...
FEC Heliports
... Omni-directional beam spread. Fast and easy lamp changing through a twist and lock lampholder. Internal switch can be set at full power or flashing mode. There is an optional photo-electric sensor for automatic switching ...
AIRFIELD LIGHTING SYSTEMS UK LTD
L-802A Rotating Beacon are designed primarily for night operations at airports as an identification and location marker The Airport Rotating Beacon are designed primarily ...
MULTI ELECTRIC MFG INC.
obstruction light HF10 For the identification of aviation obstacles. In compliance with ICAO low intensity type A and AVV. range of application: building technology, industrial facilities, towers, funnels, cranes technical ...
LANTHAN GMBH & CO. KG
Airport Visual Approach Aids DeVore Aviations PLASI-2000 Airport system is fully FAA Approved under L-883 AC 150/5345-52 and listed under the approved equipment list AC 150/5345-53 Appendix 3. The system ...
Taxiway edge lights Runway lights Taxiway lights Elevated type runway lights
TEKSAV TEKNOLOJİ A.S.
... PAPI level the unit laterally whilst the rear leg provides the elevation adjustment. Corrosive resistant construction using light alloys and stainless steel make Research Engineers PAPI a robust device. The simple design ...
RESEARCH ENGINEERS
Low Intensity Aircraft Warning Light engineered according to ICAO Low Intensity Type B regulation. NAVILITE is provided with a red steady light covering 360° horizontal beam. 64 LEDs, wired in active ...
Sirena S.p.A.
The evolution of LED technology have permitted to develop an obstruction light type LOW INTENSITY LIGHT : DERBI Used to warn air traffic against obstacles (towers,masts, ...
DERVAUX S.A.
The ML-3 model is a low intensity runway light. All components are as maintenance free as possible. The 10″ Diameter cone is made of durable baked yellow enamel painted .050 aluminum. The post is electrical grade PVC ...
PFB-37002-RW-1-BA-K ICAO MEDIUM INTENSITY RED-WHITE BEACON TYPES B &A FOR USE WITH A POC THE BEACON FLASHHEAD IS SHOWN THE SEPARATE POWER SUPPLY IS INCLUDED BUT NOT SHOWN
Point Lighting Corporation
PAR 64 LED Replacement Landing Light This high intensity landing light is specifically designed as a replacement for Par 64 sealed beam units. The lamp has an MTBF of 7000 (ARW)/12000 ...
Oxley, Inc.
... battery burn time, ATEX certified DESCRIPTION Uses 1-Watt LED that's aimed backwards into the reflector. 100% of the light is captured and aimed forward as a tight collimated beam that's as bright as an incandescent. ...
... EN 650598-1) Voltage: 24V ac Power/Consumption: 2,2 W / 100 mA. Light source: High intensity Ø5mm LEDS complying with NFP 99-200 and EN 12368 standards Light intensity: Red 37 cd - yellow ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how AeroExpo processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining