Aeronautic fuselage docks

Platform with supporting strucutre by truss beams lenght: 3 767 mm – Coating: grating Staircase access with anti-slip ribbed aluminum steps depth 230 mm Guardrail composed with red lacquered handrail (RAL3000) – intermediary rail and ...

Aluminum main structure and steel frame equipped with swivel drawbar for storage position. Platform features: Platform size: 9 036 x 2 500 mm (2 abutting platforms with quick locking system) Working platform, 5° sloping – height ...

FORTAL Aeronautics Division offers a range of access platforms and docks for work and maintenance specially designed for manufacturing and maintenance workshops in the aviation industry. Our ...

It consists of a working platform, a lifting platform and a hydraulic control system; Meets the construction requirements of tunnel engineering.

According to the required height to customize different scaling ladders.

With the various aircraft models of front and rear boarding gate working stands, front and rear cargo door working stands, and wheel well working stands.

... Aircraft Maintenance Dock is used for maintenance of B737 series and A320 series, which meets the requirements of C/D inspection and spray painting of aircraft. It include Nose Dock, Wing Dock, ...

... Maintenance Dock Narrow-body Aircraft Maintenance Dock is used for maintenance of B737 series and A320 series, which meets the requirements of C/D inspection and spray painting of aircraft. It ...

... Aircraft Maintenance Dock is used for maintenance of B737 series and A320 series, which meets the requirements of C/D inspection and spray painting of aircraft. It include Nose Dock, Wing Dock, ...

Our individually fitted maintenance and work platforms for helicopters with skids are made from aluminium, which means that they are absolutely low-maintenance. The design focuses on safety and easy handling. LICO maintenance platforms ...

The German Armed Forces have been carrying out their MRO work on this platform for over 10 years. RUAG is also an advocate of this platform. With its superb stability and sturdiness and accurate workmanship, it meets all the requirements ...

... helicopters As a design project for Airbus Helicopters, LICO produced a high-access platform for use in fuel test areas. An access platform was developed and produced in line with the customer’s specific requirements. ...

This new designed Pax Door Stand is self propelled. The stand is easy to manoeuvre in the hangar or on the apron by one person because of the electric mover. The height adjustment control is electric as well. The Pax Door Stand gives ...

Cargo Door Stand for B787 Access to FWD & AFT Cargo Door, aircraft on wheels Available in Low speed, non-towable, max 5 km/h Height adjustable, manual operated hand pump

... . Multifunctional Hangars are full of equipment. Lack of space is an issue. Therefore, NIJL steps, stands and docking systems are designed to cater for several aircraft types. A number of the A350 Access Stands ...

Reliable, robust, effective Main Landing Gear Stands are available in Adjustable Height and Fixed Height. Provide convenient access solution to the Wheel Well area and the Leg area. Allow smooth engagement in space limited landing gear ...

APU Stands offer convenient and safe access to APU for visual checks and maintenance. Scissor lift mechanism enables secure APU assembly and disassembly. Suitable for indoor or outdoor use. – Adjustable Height and Fixed Height – Manual, ...

Multi-Purpose Stands Multi-Purpose Stands are designed to function on different areas of the aircraft. Versatile design enabling easy access to PAX Door, pylons, wings, cockpit, stabilizer area, etc. Sleek design that operates in space-stricken ...

... the full range of docking systems for all commercial aircraft including: Nose, tail, fuselage and wing docks individually tailored to suit any of the full range of commercial aircraft Combination ...

ZARGES work and maintenance platforms can be customised to suit your requirements at any time. We will work together with you to find the solution to your problem. Fixed or with chassis for mobile applications. Detached or attached ...

The DOCK stairs are modular built and range from 5 to 22 steps or platform heights from 1,25 m up to 5,50 m. Galvanized steel construction gives the stairs significantly longer life and minimal to no maintenance cuts ...

TETRIS 100 working platform is made of epoxy-coated steel. Thanks to its independently adjustable feet, its 90 x 50 cm platform and its steel bucket-holder, it provides interior decorators with all the comfort they need. Completely foldable, ...

Variable height Sliding plates extend safe working area Aluminium construction so lightweight, robust and easy to manoeuvre Kick-down jacks for stability Non-slip stair treads and platform Platform splits for easy storage The ...

TBD’s main landing gear platform is designed for assist aircraft ramp maintenance engineers with safe and efficient inspections and repairs. The platform can stoop under low wings and give access to the main landing gear bays of all popular ...

The customized ErectaStep is for a California 3D printer manufacturer that produces 3D metal additive printers used in space travel, supersonic and hypersonic flight, renewable energy, and advanced power production. This tooling platform ...

Narrow elevated walkways to provide access to conveyors for the purpose of clearing product jams or to perform maintenance on lines. Designed and built as a stand-alone structure adjacent to conveyor components or integrated into existing ...

Adjustable-height maintenance platform; Perfect for AW 109, 139, 169 and many other models; Hydraulic system with flow divider; Aluminum frame; The adjustable height is hydraulically driven and makes the platform compatible with several ...

Aluminium construction with plug-in connections, no tools required Substructure and platform covering made of extremely lightweight extruded aluminium profiles Self-closing door at the staircase exit Weather-resistant and maintenance-free Depending ...

Specifications 500 lb. platform capacity Adjustable to any height within its 3’ to 10’ platform floor range Double acting hydraulic hand pump Hydraulic restrictors in case of pressure failure Safety strut with pin Non-slip, self-cleaning ...

The MTX Maintenance Stair is designed to accommodate Ground crew access to the R1 door of the 737 aircraft. The MTX Stair is lightweight and easily maneuvered and deployed by one individual in less than 1 minute. The MTX Maintenance Stair ...

Instant Upright designs and manufactures aircraft maintenance access stands and docking systems. This facilitates heavy and line maintenance, repair and overhaul on all types of aircrafts. Our systems are used during MRO operations on ...

NH90 Dock The NH90 dock allows you to work all around the helicopter. This a aluminium maintenance dock consist of 4 separate sections. Each section is connected to the other one but ...

LOBO Aircraft Staging Increasing Safety & Reducing Cost The LOBO System is a versatile modular staging platform system that combines the flexibility and strength of traditional staging ...

Reduce maintenance time and provide a safe, ergonomic way access to aircraft service points with a rugged DAE Access Stand. All stands include a one year limited warranty.

... jacked’ positions. The Fuselage Dock system allows complete access to the fuselage crown areas of all aircraft types. Each side (port and starboard) of the Fuselage ...

Product Code: helicopter-maintenance-stand-3683 Helicopter Maintenance Stand Side platforms developed for most Helicopters Platform also has a cantilever to allow for skid floats Light weight and easily manoeuvred into position with on ...

Aircraft Docking Systems for Crown and Cockpit Access