- Production - Materials - Metrology >
- Materials - Semi-finished products >
- Aeronautical oil
Mineral oil based cutting fluid with our unique bio-concept Free of bactericide and boron Excellent human and environmental compatibility High performance thanks to well-proven additive technology Finely dispersed oil-in-water ...
Mineral oil based cutting oils Our Blasomill cutting oils suit various segments and requirements. The high-pressure and wear protection performance of these products therefore varies ...
Ester oil based cutting oils Our Vascomill cutting oils suit various segments and requirements. The high-pressure and wear protection performance of these products therefore varies according ...
Mineral oil based grinding oils We offer three groups of Blasogrind grinding oils, each with a different base oil. Each group incorporates various formulations to suit ...
Temperature: -40 °C - 204 °C
Viscosity: 0.000028 m²/s - 0.011 m²/s
Mobil Jet™ Oil II was the first standard Type II oil on the market. With more than five decades of flight experience, it has accrued over 5 billion hours of on-wing performance. This legendary, hassle-free, ...
Temperature: -54 °C - 225 °C
Viscosity: 0.000005 m²/s - 0.013 m²/s
... molecules to deliver outstanding performance in HTS/HPC oils. Proactively developed to respond to the evolving needs of our customers and the industry, Mobil Jet Oil 387 is our most advanced turbine ...
Temperature: -40 °C - 232 °C
Viscosity: 0.000005 m²/s - 0.0115 m²/s
... higher-temperature bulk oil stability vs. competitive HTS oils tested. Overall, Mobil Jet Oil 254 delivers improved resistance to deterioration and deposit formation compared to standard ...
Temperature: -15 °C - 100 °C
Viscosity: 0.000022 m²/s - 0.000133 m²/s
Exxon Aviation Oil Elite™ 20W-50 is a premium quality, semi-synthetic, ashless-dispersant aviation piston engine oil. It is formulated from select, highly refined mineral base oils, ...
Temperature: 40 °C - 121 °C
Viscosity: 0.00001 m²/s - 0.000066 m²/s
... additive system, Mobil AGL offers measurably better wear protection than Type I (MIL-L-7808) and Type II (MIL-L-23699) turbine oils, as well as wear resistance that is especially beneficial to military and other helicopters ...
Temperature: -40 °C - 176 °C
Viscosity: 0.000003 m²/s - 0.00001 m²/s
... extreme low temperatures restrict the use of higher viscosity engine oils. In extensive laboratory testing and in-flight performance, Mobil Avrex S Turbo 256 exhibits excellent bulk oil stability at ...
Loctite 8040 Freeze and Release Releases rusted, corroded and seized components by the shock – freezing effect Wick directly into the rust by capillary action Released parts remain lubricated and protected from corrosion
Loctite® 8154 aerosol Loctite® 8155 can MoS2 assembly paste which is ideal for slow moving or static assemblies. Prevents press fits from galling or seizing and can reduce the risk of wear during start up.
PRECISION MACHINING FROM THE FIRST CUT There is an increasing demand to manufacture accurate, lightweight components with tight tolerances. This is driving the use of aluminium or aluminium alloys. But aluminium is notoriously difficult ...
... SYSTEM STABILITY Soluble metalworking fluids used in ferrous metal machining operations are subjected to harsh conditions. Tramp oil, swarf or waste can leach into the system, contaminating the fluid and encouraging bacterial ...
REMOVE THE HEAT OF HIGH SPEED MACHINING High-speed machining means you can produce more in less time but the extreme heat it generates at the cutting edge can be challenging to deal with – especially when temperatures can reach 1000°C ...
LOW FRICTION GEAR OILS THAT OPTIMISE EFFICIENCY In many industries including wind, automotive and manufacturing, gearbox efficiency is the key driver of operational success. The challenge is friction, which compromises ...
Temperature: 100 °C
Viscosity: 0.000005 m²/s
TURBONYCOIL 600 is a standard lubricating oil with a viscosity of 5 cSt at 100°C based on high thermal stable polyol esters, and fortified with carefully selected anti-oxidant, antiwear and anti-corrosion additives.
Temperature: -54 °C - 228 °C
Viscosity: 0.000003 m²/s - 0.00962 m²/s
Low temperature oil for operation in cold weather or inflight restart DESCRIPTION TURBONYCOIL 160 is a 3 cSt oil at 100°C made of neopolyol esters containing additives to improve its anti-oxidant, anticorrosion ...
Temperature: -61 °C - 170 °C
Viscosity: 0.000003 m²/s
Preservation oil for maintenance tasks or storage DESCRIPTION TURBONYCOIL 3516 is a mineral turbine oil blended from mineral naphthenic base stocks and anti-oxidant additives, with a viscosity of 3 cSt ...
Temperature: -57 °C - 269 °C
Viscosity: 0.000011 m²/s - 0.000025 m²/s
High temperature piston engine lubricating oils DESCRIPTION TURBONYCOIL 3560 and TURBONYCOIL 3570 are single grade mineral piston engine oils. They are available in 4 different SAE viscosity grades: TURBONYCOIL ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Help us improve:remaining