... This dual light fixture is a steady burning, low intensity LED obstruction light designed to comply with ICAO LIOL Type A & B requirements. The model can be used for marking obstacles up to 45 metres above ground, such ...
AVLITE SYSTEMS
... White LED Light with clip 3 (AA) batteries included Two light output settings Clip for attachment almost anywhere SKU529091 Size: 3.875"H x 2"W x 1.75"D Weight:5.6 oz ...
... obstruction light for night time marking of structures that present a hazard to aviation: flare stacks, chimneys, off-shore platforms. Red steady. Meet explosion proof requirements. Light Type: - Low-Intensity, Type ...
CLAMPCO SISTEMI - CALZAVARA S.P.A.
... Single Aviation Obstruction Light also be named obstacle lights, aircraft warning light, aviation warning lights. This Low-intensity aircraft warning light manufactured ...
SHENZHEN ANHANG TECHNOLOGY CO., LTD
... maintenance and repair by up to 70 % TKH Airport Solutions inset lights are efficient and high-performing LED lights, providing at least 50,000 hours of service life at full 6.6A operation. The LED ...
TKH Airport Solutions
Power: 600 W
... help a pilot acquire and maintain the correct approach (in the vertical plane) to an airport or an aerodrome. It is generally located on the left-hand side of the runway approximately 300 meters beyond the landing threshold ...
Aviasafe GmbH
... The SCB-A light is a wireless solar led light to provide easily installed, removable ad low-cost visual aids for airports, without any needs of external energy, cabling or site preparation. During the ...
... The 2IL5-6I6 Series Inset LED- Lights are designated as Visual Aids for Airports to be operated on 6.6 CCR circuits where no propulsion is needed due to operational requirements FEATURES Complies with 6.6A Serial Circuit Fully ...
BATT GMBH
... VOLTAGE 28V LAMP TYPELED Emitter WIRE CONNECTIONS Pigtail WEIGH T.85 Lbs Max Qualified to MS17245 and MIL-L-6484 Dual Mode using the Light Output Selector Lock-NVIS White & NVIS Green A Rotating Dimming Knob ...
Soderberg Manufacturing Co. Inc.
Power: 2, 8 W
Voltage: 110 V - 240 V
... depending on internal switches positions ICAO low intensity type A B or E with IR depending on internal switches positions Light part fully molded with 8 levels of leds Redundant circuits for LED’s with de-coupled IR Surge protection ...
OBSTA
... Vista Threshold End – It is an elevated, frangible led light combined red and green used to mark the end and threshold of the airport’s runway. Vista Threshold End design has been done in such a way as to provide maximum ...
Signalight
... the LLGFP (Linlaner Ground Fitting Pipe) for installation of the Linlaners. The LLGFP can be placed in the pavement (concrete) as well as directly in the soft ground around the airfield. When placed in the earth/ground, ...
... IFE products has developed a family exterior LED lamps including this latest LED to replace existing 1978X position and nav lights. This PMA certified plug & play lamp offers improved performance and ...
... Red Low Intensity ICAO type A, CAA group A, photocell & flasher Red MOD lighting Guidance Red MOD lighting Guidance, photocell & flasher Red MOD lighting Guidance Red MOD lighting ...
CEL Aviation
... Only high powered LED beacon on the market that can be used as a steady burn, non-flashing beacon Cooling system allows the LEDs to be driven at higher intensities without sacrificing performance (see illustration below) 10 ...
Checkers Safety Group
... Airfield Lighting Systems PULSAR low intensity obstruction lights, ICAO Annex 14 type A and B. Low intensity obstruction lights are used for lighting of aeronautical obstacles less than ...
AIRFIELD LIGHTING SYSTEMS UK LTD
... safety for the airport and end customers. Systems Interface provides solar and battery-only powered portable airfield lighting systems for airports and helipads. Lighting kits ...
... maintenance of the airfield installation. The option of servicing Research Engineers PAPI projectors in the workshop means minimum runway shut-down time. Re-lamping projectors is also a very simple task. The cost of life of the Research ...
RESEARCH ENGINEERS
... The inset light is used in place of an elevated heliport perimeter light at locations where the lights are frequently knocked down by aircraft and or maintenance vehicles. These lights ...
FEC Heliports
... L-802A Rotating Beacon are designed primarily for night operations at airports as an identification and location marker The Airport Rotating Beacon are designed primarily for night operations ...
MULTI ELECTRIC MFG INC.
... Airport Visual Approach Aids DeVore Aviations PLASI-2000 Airport system is fully FAA Approved under L-883 AC 150/5345-52 and listed under the approved equipment list AC 150/5345-53 Appendix 3. The system is a single box, ...
... Low Intensity Aircraft Warning Light engineered according to ICAO Low Intensity Type B regulation. NAVILITE is provided with a red steady light covering 360° horizontal beam. 64 LEDs, wired in active edundancy (16 independent ...
Sirena S.p.A.
... Marker body made of injected plastic PE/HD, aviation yellow or traffic blue with special anti-U.V. treatment. Corrosion proof. Removable retro-reflective sleeve with High Intensity reflective power. Available in different dimensions & ...
... The ML-3 model is a low intensity runway light. All components are as maintenance free as possible. The 10″ Diameter cone is made of durable baked yellow enamel painted .050 aluminum. The post is electrical grade PVC ...
the best suppliers