Analog accelerometers

... versions) and the Mini Q (150C, 185C and 200C) high-temperature Energy Accelerometers for down hole measurement-while-drilling and wireline applications. High temperature accelerometers are designed to ...

Frequency: 0 Hz - 4,500 Hz

... Response Stud Mounting FAQ Frequently Asked Questions What is an accelerometer? Accelerometers measure the acceleration or vibration of a device or system. Physically, the accelerometer ...

The MS1000L product is a MEMS capacitive accelerometer based on a bulk micro-machined silicon element specifically designed for highest stability. The product is low power, fully calibrated, robust up to 6000 g and ...

Acceleration range: 2,942 m/s²
Frequency: 1 Hz - 20,000 Hz

The Dytran model 3433A1 is a low power, triaxial IEPE accelerometer with a 5 mV/g sensitivity and an overall weight of 14 grams. Featuring a bias voltage from +1.5 to +3.0 VDC, the Dytran model 3433A1 was designed ...

Acceleration range: 9,807 m/s² - 49,033 m/s²
Frequency: 0 Hz - 2,100 Hz

... measurements Slightest interference Degrees of protection: IP61 equivalents About the ARF-A-T Low Capacitance Triaxial Accelerometer The ARF-A-T acceleration transducer measures acceleration in three directions ...

Frequency: 100 Hz

... description of the ProAccel® triaxial accelerometer is ACCURACY. Scale factor, bias and alignment have all been optimized far beyond the performance of the usual MEMS accelerometer. There is no better ...

Acceleration range: 1 m/s² - 196 m/s²
Frequency: 20 Hz - 60 Hz

The Sherborne Sensors’ A200 range of Servo Accelerometers measure vector acceleration with high accuracy using a closed loop force balance torquer mechanism. A pendulous mass develops a torque proportional to the product ...

Acceleration range: 29, 59 m/s²

Single Dual and Tri-Axial Accelerometers Range—Vertical: +6G to -3G Longitudinal: +1G Lateral: +1G Tested To—TSO C51a RTCA DO-160 ENV CAT D2AJER/XHXKXM XFXABBAB Compliance—ARINC 573 ARINC 717 ARINC 542A Certification—With ...

Meggitt (Sensorex) SX41170 servo-inclinometer/ accelerometer is DC in/ DC out single axis inclination sensor. The output is proportional to the sine of the angle. This inclinometer/ accelerometer ...

Omnia G-METER is a compact and reliable instrument that integrates a G-METER and a Slip Indicator. It can be configured with 3 different full scales, up to +8/-4G. All the components of the Omnia family are equipped with a state-of-the-art, ...

Acceleration range: 29 m/s² - 157 m/s²

SA Series Accelerometers Connect directly to any XR440 or XR5-SE Data Logger or three inputs of a data acquisition system (0 - 3.3 Vdc signal range). Triple Axis Accelerometers Waterproof IP67 Protection ±3 ...

Frequency: 300 Hz

The JA-80GA accelerometer provides a high accuracy, cost effective measurement solution for industrial grade applications. The JA-80GA has been designed specifically for -55 to +96℃ operation whilst providing excellent ...

Frequency: 5 Hz - 2,000 Hz

... environments. L3Harris’ Multi-Axial Accelerometer is an essential component in L3Harris’ advanced accident-survivable flight recording systems designed for use in commercial and military aircraft. The Multi-Axial ...

... Any input is able to acquire dynamic transducers’ signals or parametric data (temperature, static torque, pressure). Accelerometers & velocity sensors ICP®, TEDS, (2 or 4 mA) Integrator, double integrator and differentiation ...