Detectors

The FLIR identiFINDER R700 Backpack Radiation Detector (BRD) offers new spectroscopic broad-search capabilities. Once dismounted, the identiFINDER R700 provides the capabilities required to successfully perform wide-area ...

... sensitivity of bench-top trace detectors in a handheld design. An automatic internal calibration makes manual calibration and verification steps obsolete and eases the everyday use. Outstanding Performance from an ...

Screen for trace explosives anywhere, comfortably with the ETD Mobile Workstation. DSA Detection has done the research and found the best workstation for ETD screening. Made with 13-gauge steel (warranted for five years), the workstation ...

Sensitive, stable and easy to use, the Leidos handheld unit detects a medium-sized pistol and identifies foil-wrapped drugs and pieces of jewelry from only an inch away. The unit quickly screens large numbers of people in a short amount ...

... Simultaneous dual mode detection by using one detector significantly decreases the possibility of mechanical failure associated with two detector systems. Maintains a low, stable humidity level in the ...

Super Scanner® V Hand-Held Metal Detector Originally designed for use at the Olympic Games in 1984, Garrett’s Super Scanner is the most recognized hand-held metal detector in the world.

Regula 7515 is a compact device which consists of a controller constructed in metal body and two scanners used for non-destructive examination of the structure of electroconductive nonferromagnetic and ferromagnetic materials. The device ...

Summary NUCTECH COMPANY LIMITED offers RT series Raman spectrometer for rapid, accurate identification of unknown liquids and solids such as threat liquids, narcotics and explosives. Based on Raman spectroscopy, RT series Raman spectrometer ...

AWI's Lightning Display and Recording SystemFeaturing the Model 6500 Lightning Detection Sensor 6500_2The Model 6500 Thunderstorm/Lightning Sensor detects electrical discharges associated with thunderstorms within a 200 nautical mile ...

The BTD-300 Thunderstorm Detector is a standalone sensor that reliably detects the presence of all forms of lightning to a range of 83 km The BTD-300 Thunderstorm Detector is a standalone sensor that ...

... objects. Education area: Prevent taking cheat-tool,such as: telephone, electronic dictionary, and so on. • Portable metal detector, convenient to take. • It can be recharged. It needs 4-6 hours for charging. (standard ...

... currentThe detector design guarantees a high interference immunity compared to air speed, pollution and EMV influences. The detector module will fasten on the pedestal according to the bajonett principle ...

Tailgate Detector, TDflex™ Prevents unauthorized access to secure areas Our Tailgate Detector, TDflex™, is an anti-tailgating solution that ensures only authorized people enter a secure area by adding ...

Real-time, in-flight early damage detection for aircraft equipment that tells you what you need to know, when you need to know it. MetalSCAN 1000 series is fully integrated into the lubrication system of aviation engines and helicopter ...

AURA AI-2 PROVIDES TWO CHANNEL LONG RANGE HIGH SENSITIVITY INTRUSION DETECTION FFT Aura Ai-2 applies artificial intelligence to detect and locate skilled stealthy intruders climbing, cutting or lifting perimeter fences with high sensitivity. ...

Pharovision’s “SENTINEL” FOD detection system provides continuous scanning of airfield runway, taxiway, and other tarmac surfaces. Integrated multiple units can provide complete coverage of an entire airfield. Detected potential targets ...

Why an overheat detector? The THERMOCOAX Bleed Air detector is designed to detect leaks in an aircraft’s pneumatic duct system by sensing the temperature of the overheat air surrounding the leaking duct. ...

xmThe FOD Finder™ XM system is the only certified mobile FOD detection system approved by the FAA. The millimeter wave (MMW) radar system operates at day and night and in all weather conditions. The 78-81 GHz band does not interfere ...

The “Fuse Detection Bent Arms” are used to assure the detection when there is an attempt to climb and cross the protection system. They can be used at the top of instrumented fence (PERIFENCE) or sensor net (PERISTOP®), for the protection ...

The QS-B220’s large high-resolution touch-screen, with over 40% more viewing area than other ETD systems, makes operating the system simple. All functions are accessed through dynamic touch buttons that present screCombining the latest ...

Locating fence-mounted intrusion detection sensorFlexZone is a coaxial cable-based fence-mounted system that detects and locates any attempt to cut, climb or otherwise break through the fence. FlexZone adapts to a wide variety of fence ...