NDT laser scanners

Distance range: 30, 50 m

The Nikon Laser Radar is the only solution available that provides automated, non-contact measurement capability for large-volume applications of up to 50 meter radius. The new generation of metrology instruments precisely ...

The multi-laser XC65Dx laser scanner captures all 3D details of features, edges, pockets, ribs and freeform surfaces in a single scan. It’s entirely digital 3D digitizing operation boosts ...

Automatic X-Y Scanner12in.x18in. (0.30mx0.46m)Magnetic or suction feetLiquid feed Battery operated or ACStandard package includes TunnelScan, battery packs, 15ft interface cable and battery chargerBattery operated X-Y ...

Standard package includes Armadillo scanner, 5MHz dual-element transducer, interface cableLiquid feedAdaptive gimbal for improved probe contactCompatible with TG210, TG410, Avenger EZ and Raptor for encoded B-scanCompatible ...

Automatic X-Y Scanner40in.x60in. (1.02mx1.52m)Adjustable height Liquid feedStandard package includes TunnelScan III, 15ft interface cable, AC power adapterLarge X-Y automated scannerAdjustable heightLiquid feedWorks on ...

Automatic X-Y Scanner15in.x18in. (0.38mx0.46m)Magnetic or suction feetLiquid feedBattery operated or ACStandard package includes CrosScan scanner, MCU-1 battery control unit, 15ft interface cable and ...

Manual X-Y scanner50in.x30in. (1.27mx0.76m)Magnetic or suction feetLiquid feedLightweight and portableStandard package includes StringScan II and interface cableX-Y manual scannerSuction cup or magnetic feetLightweightLiquid ...

Automatic X-Y Scanner360 degrees pipe inspectionMagnetic wheelsLiquid feedBattery operated or ACScan length 10in. (0.25m) or 18in. (0.46m)

Manual X-Y Scanner3 sizes: 18in.x 18in. (0.46mx0.46m), 24in. (0.61m) & 36in. (0.91m)Magnetic or suction feetPhased-Array (PAUT) ReadyCustom probe holders & connectors

Distance range: 15,552 in

Manual Lab Scanner – Manual X & Y axis– Manual Z Axis (search tube xxmm)– Aluminum Structure – 1/2″ Acrylic Tank36″x24″x18″– Motorized Z-Axis– Manual Gimbal Gimbals– 18″ through tank turn table

Distance range: 15,552 in

Automated Lab Scanner – Motorized X & Y Axis– Manual Z Axis (search tube xxmm)– Aluminum Structure– 1/2″ Acrylic Tank

Industrial Scanner – Motorized XYZ Axis– Steel Structure– 1/2″ Acrylic Tank48″x36″x24″– Stainless Steel Tank– Motorized Gimbal Gimbal– 24″ through tank turn table (cap. 200 lbs)– TecView™ Contour Following module

Large Industrial Scanner– Motorized XYZ Axis– Steel Structure– Stainless Steel Tank 60″x36″x36″– Through Transmission Yoke– Motorized Gimbal Gimbal– 24″ through tank turn table (cap. 200 lbs)– TecView™ Contour Following module

Accuracy: 300 mm - 500 mm

... interchangeably used with this scanner. Although manual , this scanner has the capacity to generate C-Scans comparable to the ones produced by immersion or automated scanners. Moreover, ...

Accuracy: 1,000, 375 mm

TecScan’s TecFlex Scanner consists of an X, Y manual scanner that can be used for Ultrasonic, Eddy Current, Pulsed Eddy Current, and TOFD inspections. With encoder feedback on both axes, and an indexing ...

... includes a manual axle scanner and phased array technology. The scanner performs a full 360° rotation of the phased array probe around the axle axis. Making use of the multi-angle capabilities of the ...

TecScan offers a dual axis manual scanner specifically designed for Time of Flight Diffraction (TOFD) applications. This Manual TOFD Scanner was designed to perform encoded TOFD inspections parallel (X) ...

TecScan’s R-Theta Manual Inspection Scanner is a two axis scanner designed for Non-destructive, circular inspections. Equipped with encoded radial (R) and rotational (θ) axes, this scanner ...