{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
CWI Nickel 200 (UNS N02200) is a commercially pure (99% minimum) nickel alloy which has good mechanical properties and excellent corrosion resistance in various environments with chemistry ...
Central Wire Industries
CWI Nickel Prime Series 36 is a nickel-iron alloy that has low coefficient of expansion from cryogenic temperatures to about 500°F (260°C).
Central Wire Industries
CWI Nickel Prime Series L605 is an austenitic cobalt-base superalloy with good formability, high strength to 1500°F (816°C) and good oxidation resistance to 2000°F (1093°C). UNS R30605 - Cr: 19.0-21.0%, Ni: 9.0-11.0%, ...
Central Wire Industries
CWI Nickel Prime Series C276 is a solid-solution-strengthened, nickel-molybdenum-chromium alloy with a small amount of tungsten, which exhibits excellent corrosion resistance in a wide range of aggressive ...
Central Wire Industries
CWI Nickel Prime Series MP35N®* is a multi-phase, nickel-cobalt based alloy that has a unique combination of ultrahigh tensile strength, good toughness and excellent corrosion resistance. UNS ...
Central Wire Industries
CWI Nickel 205 is a wrought nickel alloy possessing an excellent combination of mechanical and electrical properties. UNS N02205 - Ni: 99.0% min, Mg: 0.01-0.08%, Ti: 0.01-0.05% and ...
Central Wire Industries
CWI Nickel Prime Series 35-19Cb is an austenitic nickel-chromium alloy, similar to 330 with addition of niobium (columbium). It is suitable for high temperature application up to 2012°F (1100°C).
Central Wire Industries
CWI Nickel Prime Series Invar 36 is a nickel-iron, low expansion alloy. It is typically used for applications where dimensional changes due to temperature must be minimal.
Central Wire Industries
CWI Nickel 211 has a better electrical conductivity and higher strength at elevated temperatures when compared to Nickel 200. UNS N02211 - Ni: 93.7% min and Mn: 4.25-5.25 with full chemistry to ASTM F290
Central Wire Industries
CWI Nickel Prime Series 20 (20Cb3) is an iron-based, austenitic alloy with outstanding corrosion resistance in a number of different environments. It also offers an excellent resistance to hot sulfuric acid. UNS N08020 ...
Central Wire Industries
301 stainless strip, ASTMA-666, is slightly lower in chromium and nickel content than Type 302. The lower nickel content causes Type 301 to work harden more rapidly and retain greater ductility than the ...
Gibbs Wire & Steel Co., Inc.
302 Stainless Steel Strip, ASTMA-666, a general purpose stainless alloy, is 18% chromium and 8% nickel. It possesses excellent resistance to heat and corrosion. Type 302 cannot be hardened by heat treatment and is slightly ...
Gibbs Wire & Steel Co., Inc.
... applications requiring a low rate of work hardening and typically undergoes severe cold forming during fabrication. The higher nickel content slows the work hardening and makes it ideal for eyelet and other deep draw ...
Gibbs Wire & Steel Co., Inc.
... bearing stainless steels possessing a greatly increased resistance to chemical attack as compared to that of the basic chromium-nickel analysis. In addition, Type 316 also offers higher creep, stress-to-rupture, and tensile ...
Gibbs Wire & Steel Co., Inc.
316Ti™ is a titanium stabilized Type 316 stainless. It is produced to ASTM A240 and DIN/EN No. 1.4571. Titanium is added to minimize corrosion over extended exposure to elevated temperatures ranging from 900 to 1500 degrees °F (425 ...
Gibbs Wire & Steel Co., Inc.
... resistance. After forming, it can be heat treated at 900° F for one hour to achieve maximum "CH" tensiles. Gibbs stocks 17 chrome-7 nickel stainless steel in the "C" cold rolled condition in gauges from .008" to .025".
Gibbs Wire & Steel Co., Inc.
Type 302 stainless steel wire is a general purpose stainless alloy typically composed of 18% chromium and 8% nickel. It is the most widely used stainless spring wire because of its high corrosion resistance properties ...
Gibbs Wire & Steel Co., Inc.
Type 302 stainless steel wire is a general purpose stainless alloy typically composed of 18% chromium and 8% nickel. The balance of the chemistry is: carbon 15% maximum, manganese 2.00% maximum: and silicon 1.00% maximum. ...
Gibbs Wire & Steel Co., Inc.
Similar in composition to Type 302, Type 316 stainless steel wire has a slightly higher nickel content and 2-2.50% molybdenum giving this alloy better corrosion resistance. Type 316's tensile strength is 10-15% lower ...
Gibbs Wire & Steel Co., Inc.
Type 17 chrome - 7 nickel stainless steel wire (AISI 631) has the corrosion resistance of Type 302 plus superior strength and heat resistance. This grade of stainless wire possesses high elastic qualities similar to music ...
Gibbs Wire & Steel Co., Inc.
... elements, , ceramic heaters, floor heaters, elements, cables, electric blankets, appliances, hot plates, grills, toaster ovens, space heaters, igniters for detonators and air bags, geating cables and ...
Please specify:
Help us improve:
remaining