Plate stainless steel
Mechanical strength: 931 MPa - 1,517 MPa
Typical elongation: 10 % - 14 %
... a precipitation hardenable stainless. It is a medium to high strength material achieved through appropriate ageing treatments (see table below) and contains very good resistance to stress corrosion. PH 13/8MO stainless ...
Thickness: 0.13 in
Length: 120 in
Width: 48 in
ATI sheet stainless steels are flat-rolled products produced by continuous mill rolling, available in coils or cut lengths. Thicknesses range from 0.018" to 0.1874" and widths range from 24" to 48". For ...
Thickness: 3 mm - 25 mm
Length: 2,000 mm
Width: 3,000 mm
Sandvik provides plate and sheet in a range of advanced stainless steels and special alloys. Examples are: Stock standard grade: Sanicro® 28 (UNS N08028) Other grades: Sandvik 2RE10 ...
Thickness: 3 mm - 200 mm
METAL PLATES / SHEETS Sizes Minimum thickness 0.156 inch or 3.00 mm Maximum thickness 6.000 inch or 200.00mm
Mechanical strength: 950,000,000 Pa
Hardened and tempered Rm = 950 - 1050 N/mm² HB 269 - 311 Steel for moulds with excellent corrosion resistance. Suitable for polishing.
Diameter: 0.25 in
Thickness: 0.38 in
Length: 240 in
Item: 21542 Shape: Plate Temper: 0.3750 IN Thick Plate 347 STAINLESS Hot Rolled, PICKLE, Annealed 96.0000 IN Width X 240.0000 IN Length Specs: ASME.SA240,AMS.5512,ASTM.A262,ASTM.A240,ASTM.A276 ...
We carry a large selection of stainless steel aircraft sheet and plate available in a variety of specifications. AMS 5513, AMS 5516, AMS 5511, AMS 5517, AMS 5518, AMS 5519, AMS 5901, ...
Mechanical strength: 655,000,000 Pa
Elasticity: 197,000,000,000 Pa
Typical elongation: 40 %
This austenitic chromium-nickel-manganese stainless alloy was developed mid-century to conserve nickel. Alloy 201 can be used as an alternative to alloy 301 in some tempered applications. Because of the relatively high ...
Thickness: 4.76 mm - 25.4 mm
Length: 2 m - 6 m
Width: 40 mm - 100 mm
... drawn cross-sections are more precise and have a better surface finish than hot extruded parts. The cold drawing process for steel bars and wire- Coating: The surface of the bar or coil is coated with a drawing lubricant ...
Mechanical strength: 160,000 psi
Typical elongation: 5 %
17-4 PH is a martensitic, chromium-nickel-copper precipitation-hardening stainless steel. 17-4 PH stainless steel is capable of attaining a wide range of strength and ...
... and gas and oils pipes, desalination factories. Characteristics Improved qualities over the 304/316 Stainless Steel. High mechanical ...
Diameter: 0 mm - 200 mm
... includes aluminium, alloy steels, stainless steel, nickel alloys, titanium, and phosphor bronze, in both aerospace and commercial specifications/alloys, spanning all semi-finished forms ...
Your suggestions for improvement:
Receive updates on this section every two weeks.