Smart card reader 9160335-S
RFIDfor access controlfor airport

smart card reader
smart card reader
smart card reader
smart card reader
smart card reader
Add to favorites
Compare this product


smart, RFID
for access control
for airport


Stay flexible. Traditional and modern method of access control in a single reader. The 2N® Access Unit 2.0 Bluetooth & RFID reads both frequencies of RFID cards – 125 kHz and the smart 13.56 MHz. The users can also authenticate with their mobile phone. All they need to do is switch on Bluetooth and install the 2N® Mobile Key application. They can leave their phone in their pocket and simply tap the reader. Interfaces Power supply: - PoE and/or 12 V/1 A DC PoE: - 802.3af (Class 0–12.95 W) LAN: - 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack (2N® Access Unit Bluetooth has terminal block or pigtail RJ-45) Recommended cabling: - Cat-5e or better Active switch output: - 8 to 12 V DC/max 600 mA Passive switch: - NO/NC contacts, up to 30 V/1 A AC/DC Inputs: - 2 inputs - in passive/active mode (-30 V to +30 V DC) (2N® Access Unit Bluetooth has 3 inputs) OFF = open or Uin> 1.5 V ON = short-circuit or Uin< 1.5 V Tamper switch: - native part of the 2N Access Unit 2.0 Audio: - buzzer (97dBA) Supported protocols: - DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog Bluetooth Reader Version: - compatible with Bluetooth 5.0 LE Range: - adjustable (short ~ 1,64 ft, medium ~ 6,56 ft, long ~ up to 32.8 ft Security: - RSA-1024 and AES-128 encryption RX sensitivity: - up to -93 dBm


No catalogs are available for this product.

See all of 2N NetSpeaker‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.