Smart card reader 02137-001

RFIDfor access controlfor airport

Do you have a project for modernising a house, including the access control? Do you want to remove the old controllers, simplify administration and at the same time allow residents to keep their old cards? Select our RFID reader for cards on a frequency of 125 kHz. You only need a UTP cable to connect it to the network and power supply. Forget about connecting with the controller. The unit is a smart device in its own right. Technical Parameters Interfaces Power supply: - PoE and/or 12 V/1 A DC PoE: - 802.3af (Class 0–12.95 W) LAN: - 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack Recommended cabling: - Cat-5e or better Active switch output: - 8 to 12 V DC/max 600 mA Passive switch: - NO/NC contacts, up to 30 V/1 A AC/DC Inputs: - 2 inputs - in passive/active mode (-30 V to +30 V DC) OFF = open or Uin> 1.5 V ON = short-circuit or Uin< 1.5 V Tamper switch: - native part of the 2N Access Unit 2.0 Audio: - buzzer (97dBA) Supported protocols: - DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog RFID Card Reader Supported frequencies: - 125 kHz variant 125 kHz: - EM4100, EM4102, HID Prox Mechanical Properties Frame: - robust zinc cast frame with surface finish (nickel and black color) Operating temperature: - -40°F to +140°F Storage temperature: - -40°F to +158°F Operating relative humidity: - 10%-95% (non-condensing)