The RELIANCE approach system for LED Sequential Flashing (SFL) and Threshold Identification Lights (TIL) is available with inset and elevated light fixtures. The RELIANCE Approach Flash System enables static (installation) or dynamic (configuration settings) system configurations, and single light control even in standby mode, to enhance visibility in all low and poor visibility conditions. The system supports up to CAT-III operations.
Uses
LED light used for approach sequential flash and threshold identification for CAT I, II and III operations
Features and Benefits
• Dynamic system configuration by parameter setting
• Single light monitoring even in standby mode
• Dynamic operation mode in 3 brightness steps (100%, 10% and 3%)
• Flash frequency switchable between 2 or 1 Hz
• Optional lights with high intensity
• Service local control at control unit possible
• Comfort control panel for service local control
• lucDMC Service Software
• Over voltage and lighting current protection of power and data lines
• 1× parallel remote control interface (default)
• 2× serial remote control interface (redundant) with RS-485 MODBUS / RTU (optional)
• Optional remote control interface with Ethernet MODBUS/TCP or PROFIBUS DP (optional)
• Optional CANBUS interface (proprietary protocol for RELIANCE control system)
• Light power supply with SELV
• EMI (Electro-Magnetic Interference) filter to harmonize power fluctuation
System Design
The RELIANCE™ Approach Flash System, referred to as SFL, consists of a control unit, main chain (SFL - light 1..30), threshold identification (TIL - light 31..32) and power distribution units (1..32).