1. Products
  2. REIL light
  3. Aerolighting SA

Runway end identification beacon AL-2000
for helidecksgreenyellow

runway end identification beacon
runway end identification beacon
runway end identification beacon
runway end identification beacon
runway end identification beacon
runway end identification beacon
Add to favorites
Compare this product


runway end identification
for helidecks
Other characteristics
green, yellow


2 or 3 or 4 head Rotating beacon The aeronautical beacons AL-2000shall comply with the requirements of ICAO Annex 14 Volum I Paragraph 5.3.3,and to FAA L-801 AC150/5345-12C and French STNA standards. Depending on its version, it shall besupplied in 230 Vac or 120 Vac (50/60 Hz). It shall be equipped with 2 PAR 64 lamps(1000 W or 500 W). The life duration of the lamp shall be greater than 4000hours. It shall be with coloured filters(Green or Yellow) All external metallic parts shallbe painted (RAL 1021). Its installation is simple due tothree fixing flanges. Security: The 2 lamps beaconstop immediately when at least one lamp is blown. Consumption: Electrical Box = 150 W + 2 lamps (of 500 W or 1000 W). Colours: Obtained using coloured Filters(Green—Ground aerodromes, Yellow for water aerodromes, Green and Yellow for FAA(L-801H) heliport. Flashes frequency: 26flashesper minute. Light head elevation angle: Possible adjustment possible from –5°to +35°. Finish: All external partsare painted RAL 1021, except lights protections that are in stainless steel. Fixing: By three holes located on the three fixation flanges Details 2 or 3 or 4 heads version Automatic lamp switch (4 heads version) Easy instalation Light intensity up to 400'000cd Visual range uo to 30 miles Lamp PAR64 500W or 1000W Made in Switzerland Options Colored filter Stainless steel Heater (with thermostat) ‍


7 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.