Ballard Sport Aircraft Ltd. offers to the Canadian ultralight market aReady to Fly model of the Pelican Sport that is factory assembled. ThePelican Sport AULA is a two places single-engine, high wing airplane ofconventional configuration consisting of a composite fuselage and metalwings. It is normally equipped with a fixed tricycle landing gear.The Pelican Sport AULA model was designed according to the DS-10141Canadian design standard for Advanced Ultra Light Aircraft. Our Ready ToFly aeroplanes are 100% manufactured in our factory located in the Canada.Here are the product characteristics:Common platform to all Pelican Sport models• The fuselage is made of a vacuum molded composite structureconsisting of a S2-glass vinyl ester resin laminate with a rigid PVCfoam core.• A Warp Drive carbon fibre three blade propeller with ground adjustablepitch and specifically cut for optimum performance on our models.Warp Drive aluminium spinner comes standard.• Two seats, side by side, foam seat cushions, dual sticks, dual pedals,throttle and choke knobs are located at centre console. Three-pointseat belts - shoulder harness system for both seats.• Differential hydraulic brakes activated by the pedals.• Ailerons are deflected through a bell crank/push-rod mechanismmounted on ball bearings. A torque tube connected to a mechanicallever in the console operates flaps. Mechanically operated by aJohnson bar - type lever located in the console. They offer 5 positionsfrom 0° to 45°. The ailerons deflect 12° with full flaps. Rudder andelevators are cable operated. The elevator trim is mechanicallyoperated. Fixed trims are used for the rudder and the ailerons.