Aircraft wire harness SV-HARNESS-D37

D-Subsignal

Dynon’s prefabricated wiring harnesses connect SkyView modules and accessories to the system using color coded aviation grade Tefzel® wire to simplify installation. These harnesses are manufactured by Dynon to exacting standards and are functionally tested to eliminate any risk of wiring errors. The SkyView Display Harness features a fully terminated 37 pin D-sub connector at one end that mates with the main connector on the back of the SkyView display. This harness provides all the color-coded aviation grade Tefzel® wire for every input and output signal with exception of the SkyView network. They are compatible with all SkyView displays. The Autopilot Servo Harness Kit is made exclusively with color coded aviation grade Tefzel® wire. It is 20 feet long, and features two pairs of twisted 22 gauge network wires, one 22 gauge autopilot disconnect wire, and two 20 gauge wires for power and ground. Also included are three D9 connectors (one male, two females), 18 pins, a pin insertion tool, shrink tubing, and tie wraps. One kit is required for each servo. The Transponder Harness Kit contains color-coded aviation grade Tefzel® wire, one male D25 connector, 11 pins, and a pin insertion tool- everything needed to mate with and operate the SV-XPNDR-261/262 Transponders. The ADS-B Receiver Harness Kit contains color-coded aviation grade Tefzel® wire, DB9 male connector, 11 pins, and a pin insertion tool- everything needed to mate with and operate the SV-ADSB-472 ADS-B Receiver. A complete audio harness solution for connecting the SkyView Intercom with the SkyView COM radio, SkyView displays, your headsets, stereo music, and other audio inputs.