Die sinking EDM machine DRILL E 300

CNChigh-speed

Simply drill holes in multiple configurations AgieCharmilles DRILL E 300 is a high-speed drill machine widely used for drilling starting holes. In aerospace for aircraft engines, as well as gas turbines in energy production, cooling holes are needed for creating a film of cooling air on the surface of turbine blades and vanes to prevent them from overheating. The DRILL E 300 is the perfect solution when you need to add small holes on a part with inclined faces or hard-to-reach positions. Shorten your setup time AgieCharmilles DRILL E 300 is a high-speed drill machine widely used for drilling starting holes. In aerospace for aircraft engines, as well as gas turbines in energy production, cooling holes are needed for creating a film of cooling air on the surface of turbine blades and vanes to prevent them from overheating. The DRILL E 300 is the perfect solution when you need to add small holes on a part with inclined faces or hard-to-reach positions. Make your life easier Data input on the operator console is quick and simple. Technology settings are selected automatically by material electrode / piece, piece height and electrode diameter. Touching cycles can be programmed and called up with a few commands. Maximum drilling depth With drilling depths of up to 200 mm (7.78 in), DRILL E 300 is the ideal vertical drill for an extensive range of applications. Fine electrode technology Its technology for fine electrodes Ø0.1 – 0.3 mm (0.004 – 0.012 in) make the DRILL E 300 suitable for drilling fine start holes on lead frames or high-speed stamping molds.