• Products
  • Catalogs
  • News & Trends
  • Exhibitions

0 - 10hp piston engine DA70EFI
0 - 10kgfor drone2-stroke

0 - 10hp piston engine
0 - 10hp piston engine
0 - 10hp piston engine
Add to favorites
Compare this product
 

Characteristics

Engine power
0 - 10hp
Dry weight
0 - 10kg
Applications
for drone
Cycle
2-stroke
Number of cylinders
single-cylinder

Description

This DA70EFI engine comes fitted with state of the art electronic fuel injection. Special magnet configuration mounted in the prop hub allow for easy flipping of the prop for starting. The ECM is powered by a single 3 cell Lipo battery of 1500mah or larger capacity. Total power draw is only 12 watts(1 amp) at full throttle. The system has been tested from sea level to 10,000 ft altitude and temperatures ranging from 10°F to 120°F. Alternator System Options: 200W Alternator: This 3 phase brushless alternator is direct driven on the engine crankshaft. The stator is mounted to the crankshaft casing, with the rotor spinning on the crankshaft. The system includes a 200 W Power Management Unit. The PMU provides three lines with a chosen voltage in the range: 12 – 15 VDC at 15 Amps and 4.8 – 7 VDC at 7 Amps. Configurable with LiIon, LiPo, LifePO4, SLA, NiCad, NiMH, and Lead Acid Battery. 24 V option available, contact HFE Int. for info and pricing. 500W Starter Alternator: This 3 phrase brushless alternator is direct driven on the engine crankshaft. The stator is mounted to the crankshaft casing, with the rotor spinning on the crankshaft. The system includes a 500 W Power Management Unit with an integrated starter controller, allowing the engine to start remotely. The PMU provides three lines with a chosen voltage in the range: 24 – 28 VDC at 12.5 Amps, 12 – 15 VDC at 9 Amps, and 4.8 – 8 VDC at 8 Amps. Configurable with LiIon, LiPo, LifePO4, SLA, NiCad, NiMH, and Lead Acid Battery.
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.