OverviewThe PDC580 multimode communication terminal integrates public-network PoC, private-network DMR/analog, long-duration recording and relay-gateway functions. Designed for industrial and emergency dispatch scenarios, it provides stable, wide-area voice communications for rail maintenance, utilities, security and other professional users.
Product highlights- Expanded coverage: Nationwide PoC over 4G networks removes conventional radio range limits. For emergencies the device supports rapid network setup and direct calls, with up to 5 W transmit power and 0.16 μV receiver sensitivity for extended range.
- Clear, loud audio: Professional speaker and mid-low frequency boost deliver up to 100 dB SPL. Combined with noise-reduction algorithms, wind-noise protection and water-guiding mic design to ensure intelligible speech in diverse environments.
- Wide operating temperature: Wide-temperature battery technology enables operation from -30°C to +60°C for reliable use in cold environments.
- One-button dual transmission: Single PTT can simultaneously initiate DMR and PoC calls so the same message reaches both networks without repeat transmission.
- Long recording / RTC: Call recording up to 500 hours with one-button playback. Internal non-removable storage prevents deletion of recordings; built-in real-time clock retains time after restart.
- Cross-network relay: Functions as a relay gateway to interconnect public and private networks. Analog and DMR users can communicate with PoC terminals via gateway mode.
- Extended battery life: High-energy-density batteries with optional 3040 mAh capacity. Supports 15 W Type-C fast charge—30 minutes charge can cover a typical shift.
- Simple operation: Compatible with major PoC platforms; plug-and-play. 1.8-inch semi-transparent LCD remains readable in bright light and screen-off modes; dual PTT and split public/private info display streamline critical communications.
- Timed alert: Supports scheduled reminders for staff to report status to control center; if PTT is not pressed within the alert window the device enters alert mode and issues periodic reminders.
Specifications — Wireless data communicationDMR/Analog: UHF1 400–470 MHz (hardware design range; actual use subject to local regulations).
Broadband bands: FDD-LTE B1/B3/B5/B8; TDD-LTE B34/B38/B39/B40/B41.
Positioning (optional): GPS/BDS/Galileo/QZSS; cold start <50 s (95%, -130 dBm); horizontal accuracy <5 m (90%, -130 dBm).
Specifications — GeneralDimensions (H×W×T): 128 mm × 55 mm × 37 mm (thick battery).
Weight (with antenna and standard battery): 345 g (thick) / 300 g (thin).
Interfaces: USB Type-C; 13-pin accessory port.
Display: 1.8-inch semi-transparent LCD, 160 × 128 pixels.
SIM slot: 1 × Nano SIM.
Operating voltage: 7.7 V (nominal).
Battery: Standard 1500 mAh Li-ion; optional 3040 mAh Li-ion; supports 15 W Type-C fast charging.
Specifications — TransceiverChannel spacing: 12.5 kHz / 20 kHz / 25 kHz.
Transmit power: 1 W / 5 W.
Audio output power: 1.5 W (rated).
Digital vocoder: AMBE+2™, NVOC.
Specifications — EnvironmentalESD: IEC 61000-4-2 (level 4), ±8 kV contact, ±15 kV air.
Ingress protection: IP67.
Operating temperature: -30°C to +60°C.
NoticeImages and information are for reference only. Final product and supported bands may vary by region and product version; comply with local regulations.
Features / Technical specifications- Model: PDC580
- Product type: Multimode integrated communication terminal (Public-network PoC + Private-network DMR/analog + recording + relay gateway)
- Supported bands: UHF1 400–470 MHz (DMR/analog); specified FDD/TDD LTE bands (see above)
- Positioning: GPS/BDS/Galileo/QZSS (optional)
- Display: 1.8-inch semi-transparent LCD, 160 × 128 pixels
- Interfaces: USB Type-C, 13-pin accessory port
- Battery: Standard 1500 mAh, optional 3040 mAh, supports 15 W Type-C fast charge
- Transmit power: 1 W / 5 W
- Audio: 1.5 W output, up to 100 dB SPL, supports AMBE+2™ vocoder
- Protection & environment: IP67; operating temperature -30°C to +60°C; ESD IEC 61000-4-2 Level 4