Regulator 14 volt
Open the alternator control sw. before connecting or disconnecting the regulator/att. cont. unit.
If greater voltage régulation accuracy Is desired, the yellow wire, (Pin 6) (point of régulation) may be routed to a location doser to any voltage sensitive equipment power bus.
Input Pin 7 (orange wire) is power in for the protection circuits and must be connected to a separate circuit breaker.
This circuit must be protected by fuse at the alternator.
Wires from shunt connection should be twisted together and fused at the shunt.
Recommended shunt rating is 100A/100mV. If différent shunt rating is needed for alternator loadmeter, a second shunt may be added in sériés with the shunt shown
Weightis .7 LBS MAX.