OverviewThe Dynamic Stiffness Test Bench is a high-precision electro-hydraulic system designed to measure actuator dynamic stiffness by relating the external load at the actuator output to the resulting displacement. It provides precise, repeatable measurements required for characterizing actuator dynamic mechanical performance.
System features- Integrated stiffness calibration capability.
- Multiple command signal generation modes supported.
- High-speed data acquisition with real-time monitoring and alarm functions.
- Open-architecture control software enabling online tuning and debugging.
- Multiple built-in safety protections for stable and safe testing.
SpecificationsParameter : Specification
Maximum loading force : ≥50 kN
Dynamic stiffness test bandwidth : ≥100 Hz
Loading cylinder stroke : ±10 mm (optional ±25 mm)
Displacement sensor resolution : 1 μm
Data acquisition rate : Up to 1 MHz
Control cycle : 0.1 ms
Bus interface : CAN, data rate ≥1 Mbps
Analog outputs : 4 × 4–20 mA, 4 × 0–15 VDC
Hydraulic oil temperature : ≤45 °C
System calibration error : ≤2%
Technical specifications- Maximum loading force: ≥50 kN
- Dynamic stiffness test bandwidth: ≥100 Hz
- Loading cylinder stroke: ±10 mm (optional ±25 mm)
- Displacement sensor resolution: 1 μm
- Data acquisition rate: Up to 1 MHz
- Control cycle: 0.1 ms
- Bus interface: CAN, data rate ≥1 Mbps
- Analog outputs: 4 × 4–20 mA, 4 × 0–15 VDC
- Hydraulic oil temperature: ≤45 °C
- System calibration error: ≤2%