The Multicut 300 is of extremely robust construction, designed and built specifically for the rigorous conditions of set-aside, general mowing and scrub clearance.
The twin rotors, each with massive double blade holders and robust 12 millimetre thick spring steel blades are capable of cutting and mulching scrub up to 100 millimetre thickness.
Like all Spearhead machines the underside of the deck is also important; providing a uniform full width fanned spread of mulched mowings leaving a very professional finish on the roughest of terrain.
The floating linkage combined with the wide full length skids and trailing wheels ensures the machine follows the most uneven ground contours and a special shaft drive system throughout ensures a positive transmission for maximum efficiency and total reliability.
Machine weight*:1050kg / 2315lbs with front and rear single chain guards
Hitch:Category 2 with floating clevis top link
Cutting width:2.84m / 9′ 4″
Overall width:3.03m / 10′
Overall length:2.73m / 9′
Deck height**:0.24m / 10″
Cutting height:10mm – 350mm (1/2″ – 14″)
Cutting capacity:100mm / 4″
Recommended tractor HP:50hp / 37kW
Power take-off speed:1000rpm
Gearboxes [x3]:Cast Iron housing
Input shaft:1-3/8″ Z6 input shaft
Gearbox lubricant:EP80-90W or GL-4 / GL-5 oil
Gearbox oil capacity [splitter]:1.7 litres / 3.0 pints
Gearbox oil capacity [rotor gearboxes (x2:2.1 litres / 3.7 pints
Deck construction:All welded construction
Deck material thickness:5mm (3/16″)
Side skirt material thickness:6mm (1/4″)
Skid construction:Replaceable bolt on skid shoes
Anti-scalp dish:5mm (3/16″) round pan with blade holder bar