{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
... The unique requirements of the mass production industries make specially tailored drills essential for optimal performance. ISCAR’s trained design engineers ensure that customers have the finest multifunction drilling tools for their ...
ISCAR FRANCE
Length: 3 mm - 20 mm
... carbide drills were designed and produced according to DIN 6537 standard. There are two new designations for easy product identification: SCD … (Solid Carbide Drill) SCDR … (Solid Carbide Drill Reamer) Specifications ...
ISCAR FRANCE
... The DR line of hole making tools is designed to provide an economical solution, suitable for all types of materials ISO P K N M. These tools are designed primarily for semi-finishing operations and exhibit a high level of accuracy, even when subjected ...
ISCAR FRANCE
... ISCAR is introducing new revolutionary, multifunction solid carbide tools for the PASSPORT Line. The new tools, designated PICCO MF , will especially benefit the miniature parts industries by reducing their tooling costs. The PICCOMF was designed in particular ...
ISCAR FRANCE
Diameter: 32 mm
... Material In order to extend the tool lives of the DR-MF small sized tools in 8 and 10 mm diameters, ISCAR now produces the drills from high grade steel, which can withstand higher torsion loads. ...
ISCAR FRANCE
Diameter: 12 mm - 15 mm
... provides the enduser the ability to clamp different head geometries according to the material and application. The Drill’s Pocket The drill features an innovative unique pocket which can undergo at least 25 head replacements. ...
ISCAR FRANCE
Diameter: 2.5 mm - 40 mm
Length: 1,100 mm - 2,200 mm
... precision drilling, the taper should be reduced to a minimum. Note that when the head is resharpened, the diameter of the drill changes, affecting the hole tolerance. The Shank The cross-section of the shank is V-shaped with coolant ...
ISCAR FRANCE
... Deep Hole Drilling Index Single Tube System (STS) Cooling fluid is induced through the gap between the drill and the hole, conveying the chips through the tube. Requires the usage of dedicated machines. ...
ISCAR FRANCE
Diameter: 25.4 mm - 69.5 mm
... introducing long drills for a drilling depth-to-diameter ratio of 7XD and up, to be used on standard horizontal milling centers, turning, and multi-task machines. Use of supplementary machine and setup can be avoided. The new drills ...
ISCAR FRANCE
... higher feed rates compared to other drills available in the market A wiper on the insert provides extra fine surface finish Direct insert mount - no adjustment needed for accurate hole diameter The drills ...
ISCAR FRANCE