Vimetco alro aluminum

Mechanical resistance: 80 MPa - 130 MPa
Typical elongation: 13, 16, 20, 25 %
Diameter: 15, 19, 9.5, 12 mm

Aluminum wire rod of 9.5; 12 and 19 mm diameter according to EN 1715 (chemical composition corresponding to EN AW1370 in EN 573; tensile strength from 90 to 130 MPa) for cable and conductors manufacturing. Coil weight ...

Length: 6,000 mm
Diameter: 152 mm - 330 mm

Homogenized AlMgSi billets (6005, 6060, 6061, 6063 and 6082 alloys) of 6'', 7'', 8'', 9’’, 10’’ and 11’’ diameter for extrusion, according to EN 486. Alloy 6005/6060/6061/6063/6082 Heat Treatment Homogenised Heat treatment Billets ...

Length: 3,000 mm - 7,000 mm

1xxx; 2xxx, 3xxx; 4xxx; 5xxx; 6xxx; 7xxx and 8xxx alloys series slabs, dimensions: 1040 - 1640 x 400 / 500 mm for rolling according to EN 487 (exact dimensions for a certain alloy type available upon request). Alloys 1xxx – 8xxx Different ...

Length: 25 mm
Width: 10 mm
Thickness: 5 mm

Aluminum and aluminum alloy ingots for remelting. The primary aluminium division can also produce baked anodes for aluminum smelting with dimensions up to 1500 x 1000 ...

Length: 1,000 mm - 6,000 mm
Width: 900 mm - 1,250 mm
Thickness: 0.4 mm - 1.2 mm

Embossed patterns available: Stucco, diamond and fluted. Finishes available: Mill finish surface (with clean residual oil or degreased by thermal treatment); stress levelled; marked by labelling; other requirements according to relevant ...

Length: 1,000 mm - 6,000 mm
Width: 900 mm - 1,550 mm
Thickness: 6.3 mm - 152.4 mm

Options available: Plates cut (sawed or milled) to final length and width; ink jet continuous marking according to Aluminium Association Standards, ASTM or as per customer request, marked by labelling or stenciling; neutral ...

Length: 2,000 mm - 4,000 mm
Width: 900 mm - 1,500 mm
Thickness: 1.5 mm - 5 mm

Hot rolled coils are used as raw material for the cold rolling mill. Raised pattern types available: Five bar; two bar. Available height of raised pattern of 1.1 mm –1.5 mm (0.043”– 0.059”) on one side and a smooth surface on ...

Length: 1,800 mm - 2,800 mm
Width: 900 mm - 1,550 mm
Thickness: 6.3 mm - 3,000 mm

The temper designations for aluminium or aluminium alloy cold rolled products are identical to those registered to the Aluminium Association, Wahsington DC 2006, USA, for the corresponding ...

Length: 1,000 mm - 4,000 mm
Width: 880 mm - 1,250 mm
Thickness: 0.5 mm - 3 mm

Core Alloys 3003, 3005 Cladding Alloys 4004, 4045, 4343 Sides Clad One or Both Sides (upon request) Cladding Thinckness 5%, 10%, 15% (upon request) Temper O (fully annealed) H24 (strain-hardened and partially annealed - 1/2 hard) Chemical ...

Length: 6,000, 12,000 mm
Diameter: 300 mm

... Slatina, Romania with a stone’s throw from the Alro cast house, Vimetco Extrusion benefits from a secure supply of Primary Aluminium extrusion billets of the highest quality. Vimetco Extrusion was established in 2006, ...