Wires stainless steel

Length: 1.5 m - 7 m

... blooms for the production of strip, wire, bar, hexagons and profiles. Concast blooms from Alleima are characterized by very fine surface finish and available in a wide range of stainless steels, ...

Length: 3 m - 10 m

Forging billets and re-rolling billets in a wide range of stainless steels, duplex stainless steels and nickel alloys. The billets are 100% ultrasonically and eddy current ...

Length: 3 mm - 10 mm

Forging billets and re-rolling billets in a wide range of stainless steels, duplex stainless steels and nickel alloys. The billets are 100% ultrasonically and eddy current ...

Mechanical resistance: 655,000,000 Pa
Elasticity: 197,000,000,000 Pa
Typical elongation: 40 %

This austenitic chromium-nickel-manganese stainless alloy was developed mid-century to conserve nickel. Alloy 201 can be used as an alternative to alloy 301 in some tempered applications. Because of the relatively high ...

Mechanical resistance: 635,000,000 Pa
Elasticity: 200,000,000,000 Pa
Typical elongation: 75 %

Alloy 204CU is a chromium-magnesium austenitic stainless steel with an addition of 2-4% copper and nitrogen of 0.05-0.25%. Due to the addition of copper the alloy has better formability than 201 and 304. ...

Mechanical resistance: 515,000,000 Pa
Elasticity: 193,000,000,000 Pa
Typical elongation: 40 %

Type 301 is an austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat treatment. Type 301 is non-magnetic in the annealed condition ...

Mechanical resistance: 515,000,000 Pa
Elasticity: 193,000,000,000 Pa
Typical elongation: 40 %

Alloy 302 is an austenitic stainless steel which has better corrosion resistance than alloy 301. With its higher nickel content alloy 302 does not work harden as quickly as alloy 301. The alloy is not ...

Mechanical resistance: 438,000,000 Pa
Elasticity: 200,000,000 Pa
Typical elongation: 25 %

With the addition of 3.0-4.0 % copper, alloy 302HQ becomes a specialized wire alloy with an extremely low work hardening rate. This makes the alloy ideal for cold heading applications. The alloy is nonmagnetic in the ...

Mechanical resistance: 517,000,000 Pa
Elasticity: 193,000,000,000 Pa
Typical elongation: 35 %

Alloy 303 alloy is a free-machining stainless steel specifically designed to exhibit improved machinability. It is a nonmagnetic austenitic stainless steel which is ...

Mechanical resistance: 517,000,000 Pa
Elasticity: 193,000,000,000 Pa
Typical elongation: 35 %

Alloy 303Se alloy is a free-machining stainless steel specifically designed to exhibit improved machinability. It is a non-magnetic austenitic stainless steel which is ...

Mechanical resistance: 517,000,000 Pa
Elasticity: 193,000,000,000 Pa
Typical elongation: 40 %

Alloy 304 is the standard 18/8 (18% chrome, 8% nickel) austenitic stainless steel and is the most commonly used grade of stainless steels used in the wire ...

Mechanical resistance: 485,000,000 Pa
Elasticity: 193,000,000,000 Pa
Typical elongation: 40 %

even in severe corrosive conditions. The alloy has oxidation resistance to a maximum temperature of 1650°F (899°C) continuously without appreciable scaling. The maximum temperature for intermittent exposure is 1500°F (816°C).

Mechanical resistance: 517,000,000 Pa
Elasticity: 193,000,000,000 Pa
Typical elongation: 40 %

Alloy 304V is a double melted austenitic stainless steel. The alloy is initially electric-arc melted followed by a Vacuum Arc Re-melt (VAR). This melting practice minimizes voids and contaminants while ...