{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Operating temperature: 120 °C - 260 °C
The Fluorosint® range of enhanced PTFE materials was developed to fill the performance gaps where unfilled as well as low-tech, filled PTFE-based polymers underperform. Each Fluorosint® material was specifically ...
Length: 3 mm - 610 mm
Width: 610 mm - 1,000 mm
Diameter: 1.2 m
Fluoropolymer material solution BEST for durability, high creep and abrasion resistance. The wear and friction control material is ideal for continuous, non-lubricated sliding, rotating, and oscillating applications. Typical critical ...
SAINT-GOBAIN SEALS
Length: 610 mm - 3,000 mm
Width: 610 mm - 1,000 mm
Diameter: 1.2 m
... high-speed, low-load applications as it has one of the lowest coefficients of friction among commercially availabled blended PTFE materials. Typical critical parts include: Industrial arm wear pads (production compressors), ...
SAINT-GOBAIN SEALS
Length: 610 mm - 3,000 mm
Width: 610 mm - 1,000 mm
Diameter: 1.2 m
BEST Fluoropolymer material solution for deformation resistance, thermal and electrical dissipation.
SAINT-GOBAIN SEALS
Length: 610 mm - 3,000 mm
Width: 610 mm - 1,000 mm
Diameter: 1.2 m
BEST Fluoropolymer material solution for wet environment.
SAINT-GOBAIN SEALS
Length: 610 mm - 3,000 mm
Width: 610 mm - 1,000 mm
Diameter: 1.2 m
BEST Fluoropolymer material solution for dimensional stability, vibration and tear resistance.
SAINT-GOBAIN SEALS
Length: 4 m
Diameter: 4 mm - 100 mm
... standard under the dalcon™ trademark. We hold a large stock inventory of moulded ptfe rods, ptfe tubes and ptfe extruded rod to meet your requirements. Extruded ...
Dalau
Length: 500 mm
Diameter: 25 mm - 275 mm
... standard under the dalcon™ trademark. We hold a large stock inventory of moulded ptfe rods, ptfe tubes and ptfe extruded rod to meet your requirements. Moulded ...
Dalau
Length: 500 mm
Diameter: 42 mm - 300 mm
... require uniform toleranced rod for high speed machining. We can maintain a high level of surface finish with a consistent tolerance from batch to batch. PTFE Moulded Rod & Tube We ...
Dalau
Length: 1,000 mm
Diameter: 1 mm - 480 mm
... technical specifications. We turn PTFE, PEEK, PA, PE, ETFE, and numerous engineering plastics for prototyping, small batches, and large volume runs. All these are in addition to our world-renowned dalcon™ range ...
Dalau
Operating temperature: 90, 120 °C
... stability TUFNOL Grade 2F/3/PTFE is a unique, dry-bearing material. It is a cotton fabric reinforced laminate, internally lubricated by very fine particles of PTFE uniformly distributed throughout the ...
Tufnol Composites
Thickness: 1 mm - 50 mm
Diameter: 4 mm - 200 mm
... combined with high chemical and electrical resistance across a temperature range from -200°C to +260°C. Colour: WhiteSize range:-Rod - 4 to 200mm diameter.Sheet - 1 to 50mm thick.Tube - Subject to special enquiry.
Tufnol Composites
Operating temperature: -260 °C - 260 °C
... solvents on the market today that can dissolve PTFE plastic at room temperature. PTFE's only real weakness is when the material is exposed to high energy radiation. Under such conditions, the radiation ...
the best suppliers
Please specify:
Help us improve:
remaining