Hipot testers

Touchscreen display and control IEC 61010-2-34 full compliant Dielectric withstand at 5kVAC 50VA and 6kVDC Detection modes with Min/Max current thresholds or flashover detection (ΔI) Burning function without current detection Programmables ...

Dielectric withstand at 5kVAC 500VA and 6kVDC Detection modes with Min/Max current thresholds or flashover detection (ΔI) Burning function without current detection Programmables test ramps Rise, dwell, fall Multi-ramp mode, up to ...

Test voltage 5 kV AC ▪ RS232 & USB as standard ▪ Relay contacts for start/stop operation, test status and results ▪ Designed for R&D occasional use or for small series production lines benches Dedicated for use in research ...

▪ Test voltage up to 5kVac and 6kVdc ▪ RS232 & USB as standard ▪ Relay contacts for start/stop operation, test status and results ▪ Designed for R&D occasional use or for small series production lines benches Dedicated for ...

Test voltage 0 to 12 kV AC or DC Voltage accuracy 1,5% Nominal current 40 mAAC, short-circuit 50 mA AC Default detection Delta I and Imax Imax = 40 mA AC and 20 mA in DC Programmables test ramps: rise, dwell, fall 10 sets of parameters ...

Test voltage 0 to 15 kV AC Voltage accuracy 1,5% Nominal current 30 mAAC, short-circuit 200 mA AC Default detection Delta I and Imax Programmables test ramps: rise, dwell, fall from 0 to 999 sec. 10 sets of parameters memory Interfaces ...

Test voltage 0 to 15 kV AC Voltage accuracy 1,5% Nominal current 30 mAAC, short-circuit 200 mA AC Default detection Delta I and Imax Programmables test ramps: rise, dwell, fall from 0 to 999 sec. 10 sets of parameters memory Interfaces ...

High voltage and high power hipot testers from 3 kV à 400 kV These stations meet the IEC60 standard relating to high voltage testing techniques. Electrical Hipot testers must be able to deliver large short circuit currents The ...

Dielectric strength up to 5kVAC 50VA or 6kVDC Insulation measurement up to 2TΩ at 1000 VDC Adjustable voltage from 10 to 1000 VDC by steps of 1V Programmable test ramps : Up, Steady, Down Multi-ramps mode (hipot test) 7” TFT Multi ...

Voltage test up to 5 kV AC and 6kV DC Insulation under 50 to 1000V by steps of 50V RS232 & USB in standard Dry contacts for start/stop and test results Dedicated to R&D or light production Dedicated for use in research and development ...