M5x0.8 elbow with barb for the vacuum tubing.
This fitting can be used as a substitute for the standard straight vacuum fitting on the throttle body. Use this fitting if you need to make a sharp turn from the back of the engine. This fitting is a swivel type and can spin 180° independent of the thread.
Designed for 1.6 mm ID fuel tube
Flat head screw drive (for tightening)
Viton (fuel safe) O-ring for tight pressure seal
Metric M5 x 0.8 thread
Weight - .016 lbs
Dimensions - 10.6 × 12.7 × 1.27 cm