{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Product Description Under the former Industrial Tube Company LLC brand, ITT began manufacturing low pressure ECS ducting and hoses in 1965 as a local supplier to McDonnell Douglas. We have since grown to be a worldwide supplier of OEM ...
Clean break coupling for thermal management - Non-spill flush faces to guarantee the integrity of the fluids - Thanks to a large number of balls, locking is extremely strong and perfectly suited to dynamic incidents - Compactness and lightness
STÄUBLI Connectors
Quick coupling dedicated to high flow rates: - Non-spill technology - Rapid, easy to handle and safe - Easy to maintain - FDA-compliant with specific seals (please consult us) Bet on technology and win practicality!
STÄUBLI Connectors
The VSU 38 is a symmetrical quick-release coupling: There is therefore no male / female differential on the hoses to be connected as they are fitted with identical mating halves. Hoses can be connected from either end with no risk of ...
STÄUBLI Connectors
FUEL FITTING STRAIGHT (2 PER PACK) Replacement Fuel fittings for the DA EFI system. DESCRIPTION Replacement fuel fittings for the DA EFI system. These fittings ...
HFE International
VACUUM FITTING STRAIGHT (2 PER PK.) M5x0.8 with barb for the vacuum tubing. DESCRIPTION Replacement vacuum fittings for the DA EFI system. These fittings are designed to work with ...
HFE International
FUEL FITTING 90 DEGREES (2 PER PACK) DESCRIPTION This fitting can be used as a substitute for the standard straight fuel fitting on the throttle body. Use this fitting ...
HFE International
The NEW 90 degree Elbow fitting with Male AN-6 end.
Andair Ltd.
Small Banjo This Banjo fitting can be rotated through 360 degrees and then locked off by tightening the Stainless Steel shaft. Viton bonded washers compress down to seal the fitting. The Fitting ...
Andair Ltd.
The MF20 Male fitting has a -6 or 9/16 UNF external thread. Weight each 12g with Viton(R) 'O' ring.
Andair Ltd.
... Repair System, adopted worldwide by both commercial airlines and military for aircraft service • Provides excellent high current lightening strike capabilities • Fittings available in size from 0.250 ...
The experience acquired over more than 50 years in manufacturing of tube fittings for nuclear applications with a very high level of safety and dependability enables ALYNOX to offer competitive, alternative solutions ...
AS5172 AN 893, MS 24397 BUSHING Screw Thread Reducer QML Item
B&E Manufacturing Company
FAA-PMA Approved For Dry Air Pumps And Instruments Smooth curve design minimizes loss of vacuum or pressure. Wide unrestricted passages help maintain flow rate at altitude. Less restriction on the pneumatic system increases dry air pump service life.
Aerocom Specialty Fittings Inc. design, manufacture and distribute high and low pressure fluid fittings and adapters for the Aerospace, Military, Commercial and other Critical Industries that address ...
Aerocom Specialty Fittings, Inc.
Fitting Details: The standard fitting material is CRES.
Designed to meet the requirements of the MS27796, the Gentex 3-Pin Connector mates with mask assembly breathing hoses including the Gentex MBU-5/P, MBU-12/P, MBU-20/P and HA/LP. Each connector comes equipped with a pin for attachment ...
Please specify:
Help us improve:
remaining