Taxiway light

for airportLEDwhite

A delineator, clearly marking the edge of the taxiways and roads. For the day and night marking of taxiways a vertical Blue Linlaner 375mm Post and 250mm Blue Retroreflective Sheath is necessary to comply with ICAO requirements. Specification: ICAO and CAP 168 recommendations on size and colours. Highly visible, flexible and safe in the event of run-down. Installation 30 metres centres on straights and 7 metres on curves using the Ground Fixing Pipe and Auger. Internationally approved and used by Commercial and Military users. Complies with ICAO Annexe 14 chapter 5 and CAP 168, on colours. UV Stabilised, wont degrade. Note: Slip on Retroreflective Sheaths, Ground Fixing Pipes and the Auger are accessories, only for sale with the appropriate numbers of Richmark Linlaners, and are not sold for use with non-Richmark products. 375mm Base requires 250mm coloured sheath. 740mm base requires 375mm coloured sheath. Supplied seperately. We strongly recommend using the LLGFP (Linlaner Ground Fitting Pipe) for installation of the Linlaners. The LLGFP can be placed in the pavement (concrete) as well as directly in the soft ground around the airfield. When placed in the earth/ground, the ground should ideally be compacted or firm. We recommend using the Parkinson Richmark Auger to make the hole in the ground for the LLGFP. The hole in the pavement ground should be cored 57-59mm in diameter and be at least 130mm deep to accommodate the LLGFP.