Windsocks

SWCS - Solar Wind Cone ADB SAFEGATE offers an LED Solar Wind Cone System (SWCS) that’s an ideal choice for airfields that require improved safety measures, but experience difficulties with grid access. ...

... Direction Indicators or wind cones provide visual surface wind direction and velocity information to pilots in flight or on the ground at airport and heliports. We based our wind cone portfolio on FAA ...

... Direction Indicators or wind cones provide visual surface wind direction and velocity information to pilots in flight or on the ground at airport and heliports. We based our wind cone portfolio on FAA ...

Length: 2,400 mm

HELIDECK LIGHTS - LIGHTED WINDSOCK FOR EXPLOSION PROOF AREA A windsock is used to indicate the wind direction and its intensity to helicopter operator. Every heliport must be provided with at least one ...

Length: 2,400 mm

The windsock mast is made from fiberglass and it’s frangibility certified to ICAO requirements. The windsock is affixed to a stainless steel frame which rotates 360 degrees and can be lit internally using ...

Product Information FAA AC 150/5345-27 (current edition) ETL Certified Application The L-806 wind cone is used on smaller airfields and heliports and as supplemental wind indicators near runway touchdown areas on large ...

Wind cone (LED, internal illuminated) Product Model: WC-807-I Elevated, wind cone color: red-and-white Internal illuminated: LED reflector 1×40W；L-810 obstacle: LED 5W Application: I,II,III catogery ...

COMPLIANT with the Current Edition of the following Specs: ICAO: Annex 14 – Volume I – II FAA: L-806 & L-807 AC150/5345-27 DIMENSIONS: MV240 Width: Ø56 cm Height: 237-310 cm MV400 Width: Ø100 cm Height: 365-495 cm MV800 Width: Ø210 ...

... airports windsock mast is installed at many UK airports and a wide range of overseas countries from Oman to Singapore. The oldest masts are now approaching 20 years combining a reliable service with low maintenance. All ...

... Featuring crisp LED illumination, Carmanah wind cones improve the visibility of wind direction in night and low-light conditions. Carmanah wind cones come in both permanent and portable designs.

Wind-measurement poles (Weatherpoles) help inform air-traffic control of wind speed and direction. Europoles deliver wind-measurement poles made of carbon- and glass-fibre reinforced plastic. Due to their stiffness the masts show just ...

Length: 3.6 m

... 2008 Airport Windsock (or Wind Cone, Wind Direction Indicator) is a device which helps pilots to identify the direction and speed of the wind. WDI is a conical tube made of textile and mounted on the stick with appropriate ...

... Annex 14, Volume I, Chapter 5 recommendation, any airport/heliport must have installed a wind direction/intensity signal (windsock). The positioning has to be selected in order to be visible from the aircraft/helicopter ...

Length: 2,400 mm

... indication of wind direction and velocity at a location on heliports and helipads. Application for night time marking: Windsock for rooftop heliports, helipads on offshore platforms, helidecks on shipboards, surface-level ...

Throat diameter: 36, 24, 18 in
Length: 8'00", 12'00"

The Solar Series LED internally lighted permanent wind cone (windsock) is the most rugged and the most widely deployed solar windsock in the industry. With high brightness NVG compatible ...

A heliport must be equipped with at least one wind direction indicator; It should be placed to reflect wind conditions without being affected by the turmoil caused by nearby objects or the flow down of the rotor. It must be visible from ...

ICAO windsocks Windsocks of all sizes available. ICAO compliant with a range of types available. Plastic or stainless mouth hoop, with a clip or lace on option. Un-lit and lit masts Temporary masts for ...

Provides visual indication of wind direction and velocity at a location on an airfield. L-806 wind cones are used on smaller airfields, heliports and as supplemental wind indicators near runway touchdown areas on large airfields

Length: 6 m

... compliance with ICAO Annex 14 Suitable for airports, heliports, traffic purposes and industry HA80 RG,For windsocks up to Ø 50 cm HA120 RG, For windsocks up to Ø 100 cm Option: mast powdercoated white, ...

... our aviation windsocks different? Two major things make a windsock, its material and its construction. We start off with a premium nylon fabric that is made right here in the USA to our exacting standards. ...

This complete windsock assembly incorporates four LED lights, a 140watt multicrystalline solar module, and 110Ah SLA battery. The AV-WC-L can be installed immediately and requires no costly underground wiring. Avlite’s ...

... Installation position must be not interfered by around object and airflow formed by helipad wing and make pilot recognize wind cone at 200 meters clearly. Product standard is compliance with requirement FAA, AC150/5345-27C,L-806 ...

Length: 4.3 m

High Visibility dayglow Orange Polyester, complete with fixings to be attached to existing swivel Arm.For model plane flying, firestations, home and recreational use.Please enquire about other colours and lettering.

This complete windsock assembly incorporates four LED lights, a 140watt multicrystalline solar module, and 110Ah SLA battery.Our Solar Windsock comes complete with 4m (12ft) windsock ...

SkyOx 13 Inch Windsock (5 feet) SkyOx windsocks are manufactured of long-life polyester fabric that is treated to resist the effects of wind and weather. All seams are doubled stitched with polyester ...

A wind cone is used to visually indicate wind direction at airports and heliports. Point Lighting wind cones are installed at airports, hospitals, corporate headquarters and military bases around ...

Complete 8″x40″ windsock with frame, bearing assembly and fabric sock. This windsock frame attaches to a 1/2 inch female fitting.