TRELLEBORG static seals

Temperature limit: -60 °C - 200 °C
Pressure limit: 100 MPa
Diameter: 0.5 mm

Simple in shape, the O-Ring is most commonly used in static sealing applications where simple, cost-effective leak tight performance is required. O-Rings can be supplied against all internationally recognised size standards, ...

Temperature limit: -60 °C - 200 °C
Pressure limit: 200 MPa
Diameter: 4 mm - 2,700 mm

... under severe working conditions. The small elastomer contact area of the Wedgpak® design, results in a slipper seal type performance, with low static and dynamic friction. At the same time, the elastomer ...

Temperature limit: -45 °C - 200 °C
Pressure limit: 50 MPa
Diameter: 16 mm - 700 mm

Turcon® Dual Piston Ring is typically energised by a stainless steel wave-shaped spring.The characteristics of the seal are very low friction, long service life and a controlled leakage over the rings. The Turcon® Dual ...

Temperature limit: -70 °C - 300 °C
Pressure limit: 20 MPa
Diameter: 5 mm - 3,300 mm

... friction with no stick-slip, minimized break out force and high wear resistance. Its constrained flange eliminates potential seal rotation and it is resistant to most liquids and chemicals. Unlimited shelf life.

Temperature limit: -60 °C - 200 °C
Pressure limit: 1 MPa
Diameter: 6 mm - 170 mm

... Durability, Reliability) rotary shaft seals are constructed from one or multiple Turcon® PTFE based sealing elements which are mechanically retained in a precision machined metal body. The metal body gives a robust static ...

Temperature limit: -30 °C - 200 °C
Pressure limit: 50 MPa
Diameter: 5 mm - 456 mm

... used in static locations or lower pressure dynamicpositions, where high sealing efficiency and shape stability areimportant. Kantseals can be compression molded or machined and additionalcorner chamfers or radii can ...

Temperature limit: -150 °C - 200 °C
Pressure limit: 60 MPa
Diameter: 3 mm - 3,300 mm

... helical spring ensures effective sealing even in extremely low temperature applications. These helical spring seals are ideal for slow moving and static applications or in a vacuum sealing applications.The ...

Temperature limit: 750 °C
Pressure limit: 200 MPa
Diameter: 20 mm - 500 mm

Wills Rings® are metal seals, supplied in two forms, either O or C cross-sections. Controlled-compression type face seals, for static use only, they are designed for use in extreme conditions ...