It's designed for laboratories looking for an automatic machine adapted to high precision, long and difficult cuts.
This benchtop designed cutting machine offers astonishing
capacities. Thanks to the multiple motion table, the cutting wheel, and the feed speed control system according to the
cutting torque, this machine will overcome any difficult task.
Large capacity compact cutting machine
It is fitted with a large: 320 x 540 mm chamber, and equipped with a grooved aluminium table, sized 210 x 210 mm, and stainless steel interchangeable pallets.
The large capacity of the CUTLAM®micro 3.0 relies on the use of 200 mm cut-off wheel, combined with a vertical movement range of 100 mm (Z axis) and a longitudinal range of 270 mm (Y axis).
The positioning of the axes, which can be seen on the screen is 0,01 mm accurate and feed speed while cutting can be set from 0,1 to 20 mm/sec or 0,1 to 10 mm/sec.
The use of the “smart motion” (read the following page about this device) will automatically reduce the moving of the axes in order to obtain a minimum value of 0,02 mm/sec.
A large touch-screen allows you to select the different functions using an easy to use, intuitive interface. All the positioning and cutting parameters can continuously be visible on the screen. The use of a joystick allows a fast positioning of the cut-off wheel; while in automatic and semi-automatic modes, an estimation of the remaining cutting time appears.
Three cutting modes are available: manual, semi-automatic and automatic.