IMU inertial system Pulse-80

navigation

Pulse-80 IMU is a tactical-grade Inertial Measurement Unit (IMU) that embeds low noise gyroscopes and accelerometers to deliver optimal performance in applications where precision and robustness matter in all conditions.It has been engineered with redundant sensor design that improves data robustness, as it performs continuous built-in-test (CBIT). This makes our IMU ideal for critical applications. Make no compromise between size, performance, and reliability.Available this summer!High performance and robustness: Pulse-80 provides a constant behavior in all environments thanks to its extensive calibration from -40°C to +71°C.Excellent SWaP-C ratio: Achieves tactical grade while maintaining a smart balance of performance in a 250 g and 2 W sensor. Available in OEM version.ITAR free: No export restriction. Designed and manufactured in France.+15 years of expertise: Thousands of inertial sensors delivered worldwide.Key Features:6 Degrees of freedom: 3 axis accelerometers and 3 axis gyroscopes.Accelerometers bias instability: 6 μgPower consumption: 2 WGyro bias Instability: 0.1 °/hrApplications: AUV Navigation, Battlefield Management System, Industrial Logistics, Land Navigator, Loitering Ammunitions, Pointing & Stabilization, Railway Positioning, RCWS, Subsea Navigation, UAV Navigation, UGV Navigation, USV Navigation, Vehicle localization, Robotics, Aerospace, Automotive, Marine environments.Specifications:Accelerometer performance:Range: ± 15 / ± 40 gLong term bias repeatability: <1 mgBias in-run instability: 6 μgScale factor: 300 ppmVelocity random walk: 0.02 m/s/√hVibration rectification coefficient: 0.03 mg/g²Bandwidth: 480 HzGyroscope performance:Range: ± 400 °/sLong term bias repeatability: 20 °/hBias in-run instability: 0.1 °/hScale factor: 150 ppmAngular Random Walk: 0.012 °/√hVibration Rectification Error: 0.08 °/h/g² rmsBandwidth: 100 HzInterfaces:Output Protocols: Binary sbgEComOutput rate: Up to 2 kHzInputs / Outputs: 1x RS422CAN: 1x CAN 2.0 A/B, up to 1 MbpsSync IN/OUT: 1 x Sync in/out (Event in, Sync out, Clock in)Clock Modes: Internal or external (direct at 2kHz or scaled)IMU configuration: sbgINSRestAPI (clock mode, ODR, sync in/out, events)Mechanical & electrical specifications:Operating voltage: 5 to 36 VDCPower consumption: <1.8 WEMC: EN 55032:2015, EN 61000-4-3, EN 61000-6-1, EN 55024Weight: 260 gDimensions (LxWxH): 56 x 56 x 50.5 mmEnvironmental specifications & operating range:Ingress protection (IP): IP-4xOperating Temperature: -40 °C to 71 °CVibrations: 10 g RMS | 20 Hz to 2 kHzShocks: < 2000 gMTBF (computed): 50 000 hoursCompatibility: Compatible with SbgCenter (data logging), Robot Operating System (ROS), Pixhawk autopilot systems.Documentation: Comprehensive user manual available for installation, operation, and integration.Production process: Designed, manufactured, and tested with advanced engineering and rigorous quality control for high reliability and accuracy.Comparison with other products: Outperforms in performance, precision, and compact design compared to Ellipse Micro IMU and Pulse-40.FAQ: Detailed answers about IMU vs INS, IMU functions, and application best practices.Key technical characteristics:6 DOF (3-axis accelerometers, 3-axis gyroscopes)Accelerometer range: ±15 / ±40 gGyroscope range: ±400 °/sAccelerometer bias in-run instability: 6 μgGyroscope bias in-run instability: 0.1 °/hVelocity random walk: 0.02 m/s/√hAngular random walk: 0.012 °/√hAccelerometer bandwidth: 480 HzGyroscope bandwidth: 100 HzOutput rate: Up to 2 kHzOperating voltage: 5 to 36 VDCPower consumption: <1.8 WWeight: 260 gDimensions: 56 x 56 x 50.5 mmOperating temperature: -40 °C to 71 °CIngress protection: IP-4xMTBF: 50,000 hours