Runway light 796

runway edgefor airportLED

High intensity, bidirectional elevated runway edge light Low maintenance effort Optimal solution for bad weather conditions The fitting type 796 is a fixed-focus, high intensity, bidirectional, lightweight, elevated runway edge light constructed to meet the demands for easy mounting, levelling and service, capability to resist jet blast from today’s aerocrafts, and last but not least to give sufficient light intensity, in the right angles with the use of a standard lamp with an optimal life-time. Application The high intensity fitting type 796 is intended to be used in all weather conditions for edge lighting of instrument runways, designed for operation under CAT I, II and III conditions. It is also suitable as threshold and runway end light. Features • The design is based on FAA Advisory circular AC 150 / 5345-46A • FAA-L-862 requirements to be achieved with clear lenses and 100 W bulb • FAA-L-862E requirements to be achieved with green innerlens and 150 W bulb • ICAO requirements in Annex 14, Vol.1, fig. 2.9 and 2.10 to be achieved with 100 W bulb • Heat resistant, two element lens system, providing two high intensity main beams and additional light for circling guidance • The outside lens surface is smooth and easy to clean • Extremely easy levelling and adjustment due to patented balljoint • No adjustment of the light fitting, except for initial aiming, is required • Can be supplied with prefocused 100, 150 or 200W/6.6 A halogen standard lamps with an average lifetime of 1,000 hours at 100 % intensity • Aviation color lenses available • Fully corrosion proof components • Finished in stove enamel aviation yellow • Suitable for use with a daylight marker cone