Epoxy resin prepreg TC380
for aeronautics

epoxy resin prepreg
epoxy resin prepreg
Add to favorites
Compare this product
 

Characteristics

Matrix
epoxy resin
Other characteristics
for aeronautics

Description

TC380 sets a new benchmark for toughened epoxy prepreg systems. TC380 is extremely tough with an excellent balance of OHC, OHT, CAI, and GIC/GIIC properties. It features low moisture absorption with outstanding hot/wet mechanical properties to 121°C (250°F). TC380 is optimized for out-of-autoclave/vacuum bag only (OOA/VBO) cures, facilitating construction of large or complex composite parts and assemblies. Unlike some other highly toughened systems, there is no need to sequence the prepreg front and back face, assuring robustness and simplifying lay-up. TC380 out life are 21 and 28 days, respectively. Product benefits/features Excellent open hole compressive strength High CAI strength 289 MPa (42 ksi) Excellent hot/wet strength retention Market segments Launch Aerostructures eVTOL / Urban Air Mobility Details Product category - Thermoset Prepreg Processing - Out of Autoclave / Vacuum bag AFP/ATL Autoclave Resin type - Epoxy Tg (Dry, onset) - 201 °C / 393 °F Cure temperature (Optimal) - 180 °C / 356 °F Cure temperature (Lowest) - 180 °C / 356 °F Cure temperature (Highest) - 180 °C / 356 °F Out life - 28 days

Catalogs

No catalogs are available for this product.

See all of Toray Advanced Composites‘s catalogs
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.