Gas furnaces

Temperature range: 0 °C - 260 °C
Capacity: 1,000 l - 2,500 l

... this process two panes are bonded using a laminating foil and entered into the oven inside a vacuum bag. From outside the furnace a vacuum is generated via hose connection in order to avoid air inclusions between the ...

Temperature range: 0 °C - 1,600 °C

The gas-fired high-temperature furnaces of the HTB product line are specially developed for applications requiring fast heating up ramps. Gas-fired high-temperature furnaces ...

Temperature range: 0 °C - 1,400 °C

Continuous furnaces are the right choice for processes with fixed cycle times such as drying or preheating, curing, aging, vulcanisation or degassing. The furnaces are available for various temperatures ...

Temperature range: 0 °C - 1,100 °C
Capacity: 17 l - 1,000 l

These gas tight retort furnaces are equipped with direct or indirect heating depending on temperature. They are perfectly suited for various heat treatment processes requiring a defined protective or ...

... Contrary to double- and single-chamber furnaces, at the triple-chamber furnace the loads pass through the next chambers one-by-one in the semi-continuous mode. At the same time, three batches are found ...

... provides unique and significant improvements related to the reduction of distortion. This is done primarily using a high-pressure gas quenching system installed in the quenching/unloading chamber.

... consumption of power and process gases. Vector high pressure gas quench furnaces are the ideal solution for heat treating. Vector is a vacuum furnace with round graphite hot zone. ...

Temperature range: 1,500 °C

vacuum furnace for metals heat treatment after additive manufacturing Range of heat treatment furnaces specially designed for the 3D printing technology. Vector 3D is a dedicated line of furnaces ...

Temperature range: 1,100 °C

... process lines of carburizing furnaces without any need to significantly modify the existing infrastructure. This also applies to situations where it is necessary to replace an old, worn-out Integral Quench (IQ) furnace ...

... of post-process gases. ZeroFlow® is a unique technology for gas nitriding furnace that ensures: / Full control of the nitriding processes with the use of ammonia as the only process gas ...

Temperature range: 200 °C - 1,200 °C

... your process. Roller hearth furnaces are ideal for full anneal of steel casings to improve machinability. These may also be used for stress relief anneal of castings or forgings. This furnace can be ...

Temperature range: 840 °C - 955 °C

... electric or gas. The main PTE (electric) or PTG (gas) furnace is adapted to work with an endothermic atmosphere, produced by an external generator, powered by natural gas ...

SECO/WARWICK provides custom engineered aluminum annealing furnaces for coil and foil with capacities ranging from single coil furnaces to multi-zone furnaces with tight zone control. ...

Temperature range: 1,300 °C

A furnace constructed for sinter metals and thermal stabilization of metals such as titanium, cobalt-chromium and similar in an inert gas atmosphere, especially intended for annealing titanium alloys. With ...

Industrial continuous furnaces SAT offers a wide range of solutions adapted to your continuous process. TUNNELS AND CONVEYOR FURNACES Directly designed on the basis of your product and your ...

Temperature range: 350 °C

... used are varied (electricity, gas, coolant, steam and fuel oil) in order to adapt to the energy network available in your workshops. To meet your requirements, SAT uses its expertise to develop industrial ovens and ...

Temperature range: 1,000 °C

The EASYBATCH range consists of a set of versatile chamber furnaces, suitable for complex thermal and thermochemical treatments. Each furnace includes a built-in quenching tank, with an atmosphere transfer ...

Temperature range: 1,000 °C
Capacity: 230, 800, 1,000, 1,500, 3,200 l

... treatment conditions in a controlled atmosphere. The unloading takes place directly in the quenching tank by tilting the furnace.