{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Temperature limit: -60 °C - 200 °C
Pressure limit: 100 MPa
Diameter: 0.5 mm
... Simple in shape, the O-Ring is most commonly used in static sealing applications where simple, cost-effective leak tight performance is required. O-Rings can be supplied against all internationally recognised size standards, and can be ...
TRELLEBORG
Temperature limit: -60 °C - 200 °C
Pressure limit: 200 MPa
Diameter: 4 mm - 2,700 mm
... under severe working conditions. The small elastomer contact area of the Wedgpak® design, results in a slipper seal type performance, with low static and dynamic friction. At the same time, the elastomer wipes the surface ...
TRELLEBORG
Temperature limit: -45 °C - 200 °C
Pressure limit: 50 MPa
Diameter: 16 mm - 700 mm
... Turcon® Dual Piston Ring is typically energised by a stainless steel wave-shaped spring.The characteristics of the seal are very low friction, long service life and a controlled leakage over the rings. The Turcon® Dual Piston Rings can ...
TRELLEBORG
Temperature limit: -70 °C - 300 °C
Pressure limit: 20 MPa
Diameter: 5 mm - 3,300 mm
... friction with no stick-slip, minimized break out force and high wear resistance. Its constrained flange eliminates potential seal rotation and it is resistant to most liquids and chemicals. Unlimited shelf life. ...
TRELLEBORG
Temperature limit: -60 °C - 200 °C
Pressure limit: 1 MPa
Diameter: 6 mm - 170 mm
... Durability, Reliability) rotary shaft seals are constructed from one or multiple Turcon® PTFE based sealing elements which are mechanically retained in a precision machined metal body. The metal body gives a robust static ...
TRELLEBORG
Temperature limit: -30 °C - 200 °C
Pressure limit: 50 MPa
Diameter: 5 mm - 456 mm
... used in static locations or lower pressure dynamicpositions, where high sealing efficiency and shape stability areimportant. Kantseals can be compression molded or machined and additionalcorner chamfers or radii can be used to alter ...
TRELLEBORG
Temperature limit: -150 °C - 200 °C
Pressure limit: 60 MPa
Diameter: 3 mm - 3,300 mm
... helical spring ensures effective sealing even in extremely low temperature applications. These helical spring seals are ideal for slow moving and static applications or in a vacuum sealing applications.The chemical resistance ...
TRELLEBORG
Temperature limit: 750 °C
Pressure limit: 200 MPa
Diameter: 20 mm - 500 mm
... Wills Rings® are metal seals, supplied in two forms, either O or C cross-sections. Controlled-compression type face seals, for static use only, they are designed for use in extreme conditions where the ...
TRELLEBORG
Temperature limit: -50 °C - 200 °C
Pressure limit: 6.2, 18.9 psi
... clean-in-place applications. Typical critical parts include: Energy face and static seals with large diameter, welded back-up spring (FPSO turret swivels) and Aerospace seals (landing gearbox actuator ...
Omniseal Solutions
Temperature limit: -50 °C - 250 °C
Pressure limit: 15 psi
... Spring-energized Seal BEST in static/low speed application, providing excellent leakage control at high pressure and low temperature. Seal features a Fluoroloy® jacket whose special shape retains the ...
Omniseal Solutions
Temperature limit: -200 °C - 1,100 °C
Pressure limit: 1 bar
Diameter: 30 mm - 4,500 mm
... traces cannot be excluded due to environmental contamination.
Seal Function & Motion — Springback V-
Seals are designed for high springback and operate as low-load
seals. Their low load enables ...
Omniseal Solutions
Temperature limit: -250 °C - 1,100 °C
Pressure limit: 1,723 bar
Diameter: 6 mm - 7,000 mm
... These metal face
seals provide long service life and avoid failures common to non-metallic
seals such as environmental incompatibility, outgassing or age-related deterioration.
Applications & usage
- Designed
Omniseal Solutions
Temperature limit: -272 °C - 800 °C
Pressure limit: 10 mbar - 3,000,000 mbar
... The HELICOFLEX® seal is a high performance, flexible metal seal that has exceptional compression and elastic recovery properties. This seal is composed of a close wound helical spring surrounded by one ...
TECHNETICS GROUP
Temperature limit: 680 °C
... Technetics Group Brush Seals – Designed to increase airflow efficiency in engines and compressors Replacing labyrinth seals with brush seals from Technetics Group can reduce leakage by 5 to 17 times, ...
TECHNETICS GROUP
Temperature limit: -100 °C - 300 °C
Pressure limit: 100 bar
... various fluids PRODUCT APPLICATIONS Nuclear Food and beverage Pharmaceutical Aerospace Lids and covers, lip seal profiles Static sealing doors’ profiles (ovens, bakeries heated cabinets) Hollow profiles, hoses ...
TECHNETICS GROUP
Temperature limit: -54 °C - 537 °C
... non-contacting seal enables the face seal and mating ring to operate virtually leak-free and experience almost no wear. FEATURES & BENEFITS Benefits: Significantly lower heat generation and reduced wear compared ...
TECHNETICS GROUP
... relied on Kaydon Ring & Seal's know how, proprietary materials and processes to produce the optimum sealing ring solution for long life, performance and reliability. Kaydon sealing rings are specified for a broad range of static ...