Aeronautic software

... starting of scenarios manually. The generated ADS-B messages are fed over a network interface into the ASTERIX generation software. For visual validation AVIONIX provides the tool ASTERIX Inspector, which connects to a network stream ...

... Real-time Analysis and Safety Monitoring User-configurable screen layouts Multi-screen operation 20 updates / s refresh rate Alarms and warnings Tracked modes and engine orders Plot options include: Scopes Spectra Campbell/Time-Frequency ...

... Gimbal Control Panel (GCP): Complete Gimbal Control, out of the Box Features: The Gimbal Control Panel is the essential user interface for controlling all Ascent Vision gimbals. From initial connection to configuring sensors, the GCP is the vital ...

... Virtual worlds in real time GenesisIG produces high fidelity visualisations from GIS source data, in real time. Which means that, with GenesisIG you can train with visualisations that are as up to date as the source data used to create them. Unlike the ...

... Math Model Update Solution for Flight Simulators StallBox is a flight simulator update solution designed to provide airlines and training centers with the stall models and instructor displays necessary to conduct Upset Prevention and Recovery Training ...

... control software is a sub-module for the MITAS software package. The module allows for control of small, medium and large lighting systems through either otpo-isolated or networked interfaces with the runway lighting ...

One of Airstar’s main benefits is that it can integrate in to third party back office HR systems.The time saving that this provides is substantial, as normally these procedures are carried out using paper based systems.Airstar allows you to create and ...

... improve your daily operation. See the full release notes here. Here are six reasons you can depend on the new LanTEK IV software updates to help you get the most out of TREND AnyWARE Cloud on every job. Simplified test lists and ...

... Universal Control Software (UCS) is a central point where you can manage all your unmanned vehicles. It does not matter whether you have one drone or a fleet Tor Universal Control Software will suite your requirements. ...

... The Zünd Cut Center software suite facilitates every aspect of the production workflow – from file import and production planning, to cut data optimization, cutting system management, and remote production monitoring. Software ...

... cEQUIP is a powerful software toolset providingcomplete monitoring, control and configuration ofCurrawong’s electronic products. The software isprovided free of charge to Currawong’s customers.A Unified SolutioncEQUIP ...

... Special features Simple intuitive operation Touchscreen operation Display of unbalance as numbers or with a polar diagram for one, two or multiple balancing planes as static, couple or dynamic unbalance in terms of mass, unbalance or correction ...

... Fully-integrated software suite for TOFD, pulse echo & phased array capability. ...

... In order to take full advantage of any gimbal’s capabilities, a feature rich user interface is required. As opposed to alternative gimbal interfaces that were “designed by engineers for engineers” featuring pages of data, Trillium’s SkyLink has the clean, ...

... Graphical User Interface Analyzer/Simulator Software AIT's Flight Simulyzer is an intuitive, easy-to-use, and affordable MIL-STD-1553 GUI Analyzer/Simulator Software Application that allows users to capture, analyze, ...

... Temperature monitoring in real time Temperature monitoring with alarm function Use in production and monitoring applications Clear user interface Fast and intuitive configuration Password-protected configuration area Easy connection with programmable ...

... doesn't intimidate or confuse customers, many of whom are already apprehensive enough about skydiving in general. Our booking software is specifically designed to address the needs of skydiving operators and their customers. ...

... Fast, easy and modular equipped for any requirement User interface for all screen resolutions For all »pom« inspection machines For measuring in the measurement room or in production ...

... MCPS is a software package, which is installed in one minute on usual Windows PCs (minimum Windows7). The basic concept of MCPS is to provide an easy and fast way to configure a measurement. So MCPS is not a SCADA or development system. ...

... Analyzing preliminary aircraft designs across disciplines With a heavy increase in air traffic expected for the next few decades, aircraft and engine manufacturers are looking to give their products a substantial revamp to increase productivity, while ...

... MAX Airport allows your agents to “break away” from the fixed counter and service every passenger need from any location, any time. MAX Airport’s intelligent design and rich set of functionality will reduce the number counter transactions, significantly ...

... airspace data on ATC Working Position. Compliant with aviation standards and operational safety and reliability demands. Software components: Surveillance Data Processing System (SDPS) Reads and processes surveillance data from many ...

... acquisition of high fidelity test data and achieve dramatic improvements in overall test speeds. AeroPro test management software features a tightly integrated control and data acquisition user interface and unmatched set of advanced ...

AIROPS 5 is an aviation management system designed to support Aircraft Operators and Brokers in all aspects of Commercial, Operations, Technical, Finance, Marketing and Management. AIROPS 5 improves efficiency and accuracy and the speed of response to ...

... Planning Take the time and hassle out of flight planning with RunwayHD’s comprehensive range of planning features. Use the route builder to find your start and end points, then effortlessly drag and drop new waypoints around any airspace. Handy NOTAM ...