Heliport use lights

Power: 32 W

Color emitted directly by LEDs. Fully compatible with existing AFL infrastructure. A surge protection device is provided in the electronics as required by the FAA “Engineering Briefing No.67”. Specially-designed structure, protruding ...

Power: 55, 65 W

Runway 12” Edge Light Inset is an inset, unidirectional edge light placed along or just outside the edges of the area declared for use as a runway according to the edge markings. The ...

Power: 36 W

... continuation of the threshold out of the specified runway area. The Threshold light-Wing bar light has a light intensity of 5,000 cd and a life span of 60,000 hours. The light ...

Power: 42 W

Threshold lights/end lights are installed to provide quick and positive identification of the threshold/end of a runway. The colour is emitted directly by LEDs in green or red depending on the viewing ...

Voltage: 110 V - 230 V

Power: 42, 65 W

This inset approach light is fully compatible with existing AFL infrastructure, it has a lifespan of 60,000 hours and protrudes 6.35 mm above the ground. This light comes in red or white to fit the ...

Power: 12 W

... unless center line lights are installed. Inset Taxiway Edge Light is omnidirectional and has a weight of 2.4 kg. The light protrudes less than 6.35 mm above the ground and has ...

Power: 12 W

Elevated taxiway edge lights to guide and mark edges Taxiway edge lights must be installed at the edges of turning area or on aprons used in the dark. Edge lights for taxiways must be provided ...

Power: 32, 38 W

Elevated Approach / Side Row Light is an elevated approach light/ side barrette for runways to indicate the direction of approach or to give the flight crew a better idea of the approach speed during ...

Power: 32 W

Warning lights intended as traffic lights, or to warn pilots or vehicle drivers that they are about to enter an active runway RGL is a warning light consisting of a yellow flashing light ...