Lifting platforms

Height: 96 in
Carrying capacity: 500 lb

Mobile Work Platforms allows access to overhead construction or maintenance to aviation related tasks on aircraft or in the hanger. The combination of its 500-pound capacity scissor lift and dual-cylinder hydraulic system ...

Height: 1,555 mm - 3,200 mm
Carrying capacity: 205 kg

The multi purpose lift is constructed in conformity with AHM, VDE and IATA standarts.

Height: 40.3 m
Carrying capacity: 230, 450 kg

... Articulating Boom Lifts Key Specs Working Outreach: 19.90 m / 65.3 ft Working Height: 40.30 m / 132.2 ft Platform Capacity - Unrestricted: 230 kg / 507.1 lb Platform Capacity - Restricted: 450 kg / 992.1 ...

Height: 16.5 m
Carrying capacity: 230 kg

... to be placed in most air side operating areas around the terminal The Fall Arrest platform allows workers exit the platform and move a full 270 degrees around the platform within a radius ...

Height: 8.2, 10.1 m
Carrying capacity: 200 kg

... Toucan Toucan® Mast Boom Lift Key Specs Working Height: 8.20 m / 27 ft Working Outreach: 2.65 m / 9 ft Platform Capacity: 200 kg / 441 lb Up and Over Height: 5.08 m / 17 ft

Height: 109 cm - 488 cm
Carrying capacity: 227 kg - 909 kg

Self propelled work platform has 2000 lbs. (909 kg) lift capacity ● Lift up to 2,000 lbs. (909 kg) distributed loads. ● Clears 65 in. (165 cm). Platform elevates to 16 ft. (488 cm) ● ...

Height: 1.1 m - 5.5 m
Carrying capacity: 250 kg

Servicing Height Platform maximum height 5,500mm Platform minimum height 1,090mm Payload 250kg

Height: 1.9 m - 9 m
Carrying capacity: 1,600 kg

Servicing Height Platform maximum height 9,000mm Platform minimum height 1,850mm Payload 1,600 kg

Height: 0 m - 4.7 m
Carrying capacity: 0 kg - 880 kg

The TM520 cart is designed for the loading, unloading and transport of brake units stored in boxes, by means of a wheel-lift. > It is composed of a frame laid on a half-suspended running gear. > The front steering axle is equipped with ...

Height: 1,000 mm - 4,000 mm
Carrying capacity: 372.2 kg

EASY MOV PLATFORMS PA40 The PA40 Maintenance Platform has been designed primarily for smaller aircraft maintenance operations, for use on the aircraft apron, remote stands and aircraft hangars. TECHNICAL ...

Height: 12 m - 30 m
Carrying capacity: 120, 200 kg

DENKA•LIFT Telescopic trailer aerial work platforms are available with working heights from 12 – 30 m. Extensive reach distances, rapid movement speeds and a low operational weight are typical characteristics of this ...

Height: 0 m - 9.2 m

... maintenance platforms ranges from 1 m to the Airbus A380. Hydraulic movement enable platforms to be optimally positioned on the fuselage profile. Platforms can be fitted with rubber buffers, ...

Height: 1.8 m

... maintenance steps have been designed to allow two working heights at 600mm and 1,800mm with working platforms incorporating folding side rails and front platform gate. The “easy to fold flat side ...

... Series Self-Propelled Maintenance Platform are completely self-contained lift platforms with single or triple scissors. Designed primarily for aircraft maintenance use. It’s payload 1000kg capacity ...

Height: 9.7 m

... platformInfinitely variable height adjustmentSteel structure entirely galvanizedOperation up to wind speed of 40knAnti skid platform floor (4,5m x 2,0m)4 work-lights for night operationManual emergency operationsOptional: ...

Height: 0 m - 11 m
Carrying capacity: 800 kg

The Mallaghan MPL11 is a truck mounted platform lift which has been strategically designed to operate a heavy duty motorised scissor lift platform for high level work around the aircraft.

In the aeronautical industry, lift platforms serve as transport means, e.g. for complete fuselages, or also as an assembly aid during component production. Scissor lift platforme With telescoping maintenance cage

Height: 20, 19 in
Carrying capacity: 8,800 lb

The Hylifter HLM-15 aerial platform and airport mobile maintenance platform is an economic self contained hydraulic platform that fits in a ¾ or one ton pickup bed and provides 15’ vertical ...

Height: 132 cm - 380 cm
Carrying capacity: 2,500 kg

The FBCT is a durable ramp chassis with a fixed van body at the rear. An access ramp or scissor lift platform is located at the front of the vehicle for interfacing regional jets and other aircraft. The FBCT offers a ...

Height: 1,850 mm - 6,750 mm
Carrying capacity: 1.5, 500, 1 kg

McGrath Industries' Freight Hoist Scissor Lifts are ideal for transferring freight between floors in low rise two or three level applications such as warehouses, retail complexes and factories. Freight_Hoist_Scissor_Lift_2_1.jpg Compared ...

Height: 14.2 m
Carrying capacity: 1,800 kg

... standard diesel power AWPs. recommended: MEC Titan 40-s Working Height (m): 14.20 Max Outreach (m): 8 Platform Dimensions (m): 6.70 x 2.28 Lifting Capacity (kg): 1.800 Transport Dimensions (lxwxh): ...

Carrying capacity: 500 lb

Electric Wheelchair Lift (Non Passenger) The KCI Electric Wheelchair Lift eliminates the need for ground handling personnel to lift wheelchairs on to the belt loader during ground operations. The lift bed is electrically operated and ...

Height: 3.7 mm - 5.5 mm
Carrying capacity: 500 lb

... man capacity 500-600 lbs capacity Easily removed for storage Self powered with charger 60" x 30" or 60" x 44" working platform Quick and easy manual leveling Can be leveled to lift on uneven ground up to 12 degrees Can ...

Height: 1,925 mm - 14,500 mm
Carrying capacity: 600 kg

... conventional Elevating Work Platform. Safety features include platform access ladder, safety harness attachment points, removable handrails and electric photo sensor to prevent the platform ...

Height: 0.8 in - 30.8 in
Carrying capacity: 1,000, 1,500, 10,000 lb

... linkage design that attaches to he platform in four places and causes the lift platform to raise level throughout its travel - even if the load is off-centered. Because of the articulating motion of the ...

... maintenance and repair works to the Boeings 737, 747 and 777. The cunningly designed tailor-made scaffolds are comfortable working platforms, tail towers, adjustable mobile access steps, special scissor lifts and aluminium ...

Fort de l’expérience acquise par ses fondateurs dans le domaine Aéronautique, NEOTEC a dès son origine proposé des solutions innovantes pour les accès de personnes en élévation et pour la manutention de charges dans le cadre de la construction ...