Diameter: 1 mm - 100 mm
Spindle speed: 1,500 rpm
Charly4T The simplicity for the turning of prototypes and small series, the technology for the performance STRENGTHS : ISO programming, industry standard. Allows main lathing operations (rough facing, turning, ...
Diameter: 430 mm
Spindle speed: 12,000 rpm
NTX 1000 Covering Extensive Range of Machining Across All Fields Max. turning diameter 430 mm Max. turning length 800 mm Integrated spindle motor with C-Axis (0.0001°) 6,000 rpm Max. bar work ...
Diameter: 806, 527, 552 mm
Spindle speed: 4,500 rpm
The DS-30Y Y-axis turning center combines dual-spindle turning with Y axis, C axis, and live tooling to create a powerful “done-in-one” machining solution for any shop. Off-center milling, ...
Diameter: 1,000 mm - 2,600 mm
Spindle speed: 6,000 rpm
... high-performance machining center out a grinding machine. With the spindle power up to 45 kW and 345 Nm can be obtained at 6000 rpm. RAM cross section of 250x250mm, tool holders CAPTO / HSK / KM / Berthiez ...
Diameter: 230 mm
Spindle speed: 45 rpm - 5,000 rpm
... maintenance tasks Reduced chip accumulation during long, continuous runs decreases machine downtime for cleaning Max Turning Diameter - in - Ø 9.06 Max Turning Length ...
Diameter: 0 mm - 800 mm
Spindle speed: 18,000, 28,000, 40,000 rpm
... to 1000 rpm for turning operations. The A tilting axis can reach speeds of 50 rpm. The linear axes travel at speeds of 60 m/min. As the Ultrix multitask centres offer a number of different machining operations in ...
Diameter: 350 mm
Spindle speed: 1,600 rpm - 2,000 rpm
Fitting a continuously turning rotary table to a GAMMA machine creates a very interesting variant.In the example shown here, the table has a diameter of 1,600 mm and a maximum speed of 200 rpm. Depending ...
Diameter: 1,000 mm - 1,400 mm
Spindle speed: 4.4 rpm - 1,250 rpm
The turning and milling vertical lathe Pietro Carnaghi model ATF has been designed with a very compact termo-symmetrical structure with one single column assembled on the machine base. ATF ...
VTL Series powerful vertical lathes are designed to achieve higher productivity in the machining of large parts and components. The VTL series is available in a full range of capacities with and without milling capability.
Spindle speed: 100 rpm - 6,000 rpm
Your suggestions for improvement:
Receive updates on this section every two weeks.