{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Operating temperature: 23 °C - 316 °C
... infographics and a downloadable Meldin®
Polyimides handbook are available on the product page to support material selection and design.
Technical specifications
- Product family: Meldin® Polyimides
Omniseal Solutions
Length: 50 mm - 1,000 mm
Width: 50 mm
Diameter: 10.5 mm - 80 mm
... Overview
Meldin® 7000 is a thermosetting
polyimide (PI) series engineered for exceptional dimensional stability under elevated temperatures. Laboratory cycling from 73°F (22.8°C) to 500°F (260°C) showed <0.04% dimensional ...
Omniseal Solutions
Length: 50 mm - 1,000 mm
Width: 180 mm - 300 mm
Diameter: 10.5 mm - 80 mm
... Overview
The Meldin® 7000 series is a thermosetting
polyimide (PI-based) engineered for exceptional dimensional stability at elevated temperatures. The series shows less than 0.04% dimensional change after thermal cycling between ...
Omniseal Solutions
... semi-conductor, and industrial sectors. To meet diverse application needs, we offer Meldin® polyimides in various formats: available as stock shapes such as sheets, rods, and tubes, or as finished machined components ...
Omniseal Solutions
Length: 20 in
Width: 30 in
Operating temperature: -140 °C - 320 °C
... Materials:
Polyimide material with carbon fibers for H310® and glass fibers for H320®.
Service Conditions: Temperature: -140°C to +320°C; Mechanical Strength: 710 MPa.
Manufacturing Process:
Sheet molding compound ...
Omniseal Solutions
Length: 20 in
Width: 30 in
Operating temperature: -140 °C - 320 °C
... of high-temperature thermoset polyimide-based resin reinforced with 1-inch chopped carbon fiber. Best for lower to moderate speeds and high loads.
Omniseal Solutions
Length: 20 in
Width: 30 in
Operating temperature: -140 °C - 320 °C
... blend of high-temperature thermoset polyimide-based resin reinforced with 1-inch chopped carbon fiber. Best for lower to moderate speeds and high loads.H320®: Blend of high-temperature thermoset polyimide-based ...
Omniseal Solutions