Wedge ultrasonic probe 5L16-A10

ultrasonicangle beam

Overview
The universal probes feature a low-profile probe/wedge combination for access in restricted areas. A wide range of wedges is available to support angle-beam inspections. These probes are suitable for manual or automated ultrasonic inspection of welds 6.35 mm to 38 mm thick and for the inspection of castings, forgings, pipes, tubes, machined parts and structural components for cracks and welding defects.

Advantages

• Low-profile probe/wedge design for access in restricted areas
• Wave layers acoustically adapted to Rexolite
• Captive anchoring screws supplied with the probe
• Wide selection of wedges to suit angle-beam applications

Typical Applications

• A10, A11, and A12 Probes
• Manual or automated inspection of 6.35 mm to 38 mm (0.25 in. to 1.5 in.) thick welds
• Detection and sizing of flaws
• Inspections of castings, forgings, pipes, tubes, machined parts and structural components for cracks and welding defects

Probe Specifications and Dimensions

• Part Number | Item Number | Frequency (MHz) | Number of Elements | Pitch (mm) | Active Aperture (mm) | Elevation (mm) | External Dimensions mm (in.) L | W | H
• 5L16-A10 | U8330595 | 5.0 | 16 | 0.60 | 9.6 | 10.0 | 23 (0.91) | 16 (0.63) | 20 (0.79)
• 10L32-A10 | U8330251 | 10.0 | 32 | 0.31 | 9.9 | 7.0 | 23 (0.91) | 16 (0.63) | 20 (0.79)
• 5L32-A11 | U8330274 | 5.0 | 32 | 0.60 | 19.2 | 10.0 | 25 (0.98) | 23 (0.91) | 20 (0.79)
• 5L64-A12 | U8330593 | 5.0 | 64 | 0.60 | 38.4 | 10.0 | 45 (1.77) | 23 (0.91) | 20 (0.79)
• 5L60-A14 | U8330785 | 5.0 | 60 | 1.0 | 60.0 | 10.0 | 68 (2.68) | 23 (0.91) | 20 (0.79)
• 7.5L60-A14 | U8330804 | 7.5 | 60 | 1.0 | 60.0 | 10.0 | 68 (2.68) | 23 (0.91) | 20 (0.79)

Technical features / specifications

• Connector: OmniScan® connector (standard)
• Standard cable length: 2.5 m (8.2 ft)
• Low-profile probe/wedge design for restricted access
• Wave layers acoustically adapted to Rexolite
• Captive anchoring screws included
• Wide selection of wedges available for angle-beam applications
• Applications: manual or automated inspection of welds 6.35 mm to 38 mm (0.25 in. to 1.5 in.), and inspections of castings, forgings, pipes, tubes, machined parts and structural components for cracks and welding defects