Eddy current flaw detector WLD-5-63

for aeronautics

Overview
Weld probes provide an efficient eddy‑current solution for in‑service inspection of ferrous welds and general surface inspection on ferrous materials. They are a non‑hazardous alternative to magnetic particle inspection and often do not require removal of coatings such as paint or light oxidation. Probes are available in straight and right‑angle configurations and in dedicated paint‑thickness variants.

Available models

• WLD-5-63 — Straight Weld probe; Frequency: 100 kHz–600 kHz; Tip: 5.0 mm; Length: 6.1 mm; Connector: 4-Pin LEMO; Item: U8690018
• WLD-8-55 — Straight Weld probe; Frequency: 100 kHz–600 kHz; Tip: 8.0 mm; Length: 5.5 mm; Connector: 4-Pin LEMO; Item: U8690019
• WLD901-5-50 — Right Angle Weld probe; Frequency: 100 kHz–600 kHz; Tip: 5.0 mm; Length: 5.0 mm; Connector: 4-Pin LEMO; Item: U8690022
• WLD901-8-50 — Right Angle Weld probe; Frequency: 100 kHz–600 kHz; Tip: 8.0 mm; Length: 5.0 mm; Connector: 4-Pin LEMO; Item: U8690023
• NEC-2236 — Paint Thickness probe; Frequency: 100 kHz–600 kHz; Tip: 6.35 mm; Length: 10.1 mm; Connector: 4-Pin LEMO; Item: U8690035
• 9403362 — Straight Weld probe (Powerlink™ / 7-Pin LEMO); Frequency: 100 kHz–600 kHz; Tip: 5.0 mm; Length: 6.1 mm; Item: U8629270
• 9403356 — Straight Weld probe (Powerlink™ / 7-Pin LEMO); Frequency: 100 kHz–600 kHz; Tip: 8.0 mm; Length: 5.5 mm; Item: U8690033
• 9403373 — Right Angle Weld probe (Powerlink™ / 7-Pin LEMO); Frequency: 100 kHz–600 kHz; Tip: 5.0 mm; Length: 5.0 mm; Item: U8629539
• 9403374 — Right Angle Weld probe (Powerlink™ / 7-Pin LEMO); Frequency: 100 kHz–600 kHz; Tip: 8.0 mm; Length: 5.0 mm; Item: U8690038
• 9231109 — NECP-1152 SS w/45° probe tip (Powerlink™ / 7-Pin LEMO); Frequency: 100 kHz–1 MHz; Tip: 7.9 mm; Length: 14.0 mm; Item: U8629540
• SPO-4376L — SPO-4376 Straight Weld probe (Powerlink™ / 7-Pin LEMO); Frequency: 100 kHz–1 MHz; Tip: 8.3 mm; Length: 8.2 mm; Item: U8629541
• 9403361 — Paint Thickness probe (Powerlink™ / 7-Pin LEMO); Frequency: 100 kHz–600 kHz; Tip: 6.35 mm; Length: 10.1 mm; Item: U8629269
• WLD-5-63-TF — Straight Weld probe (Triax Fischer/LEMO); Frequency: 100 kHz–600 kHz; Tip: 5.0 mm; Length: 6.1 mm; Item: U8690046
• WLD-8-55-TF — Straight Weld probe (Triax Fischer/LEMO); Frequency: 100 kHz–600 kHz; Tip: 8.0 mm; Length: 5.5 mm; Item: U8690047
• WLD901-5-50-TF — Right Angle Weld probe (Triax Fischer/LEMO); Frequency: 100 kHz–600 kHz; Tip: 5.0 mm; Length: 5.0 mm; Item: U8629542
• WLD901-8-50-TF — Right Angle Weld probe (Triax Fischer/LEMO); Frequency: 100 kHz–600 kHz; Tip: 8.0 mm; Length: 5.0 mm; Item: U8690048
• 9231110 — NECP-1152 SS w/45° probe tip (Triax Fischer/LEMO); Frequency: 100 kHz–1 MHz; Tip: 7.9 mm; Length: 14.0 mm; Item: U8629184
• 9218631 — SPO-4376 Straight Weld probe (Triax Fischer/LEMO); Frequency: 100 kHz–1 MHz; Tip: 8.3 mm; Length: 8.2 mm; Item: U8629543
• NEC-2236-TF — Paint Thickness probe (Triax Fischer/LEMO); Frequency: 100 kHz–600 kHz; Tip: 6.35 mm; Length: 10.1 mm; Item: U8629544

Technical specifications

• Frequency range: 100 kHz–1 MHz depending on model
• Tip diameters: 5.0 mm, 6.35 mm, 7.9 mm, 8.0 mm, 8.3 mm
• Overall lengths: from 5.0 mm to 14.0 mm (model dependent)
• Connector options: 4‑Pin LEMO, Powerlink™ / 7‑Pin LEMO, Triax Fischer/LEMO
• Configurations: straight, right‑angle, 45° tipped, paint‑thickness variant

Applications

• In‑service weld inspection on ferrous components (eddy‑current NDT)
• Detection of surface and near‑surface flaws in various orientations
• General surface inspection and paint‑thickness measurement on ferrous substrates
• Field and workshop use where non‑disruptive inspection is required

Ordering & compatibility

• Select model by tip diameter, probe geometry and connector type to match your instrument.
• Refer to item numbers when ordering (Item = distributor/reference code).
• Powerlink™ and Triax variants ensure compatibility with instruments using 7‑pin or triax interfaces.